[U-Boot-Users] MII / RMII

[Stefan Roese]

On Tuesday 08 January 2008, Andy Fleming wrote:
> > I think that if you use an Ethernet and need to differentiate
> > between MII and RMII they should be mutually exclusive.
> > You either define CONFIG_RMII OR CONFIG_MII but not both.
> > If you have a PHY on the chip, then you do not define any of the two.
> > MII uses more pins and maybe different pins, so a port for a CPU
> > should differentiate.
>
> I'm a little late to this, but I feel I should make sure people are aware
> that CONFIG_MII and CONFIG_RMII are not, in this case, two different
> options for the same concept.  CONFIG_MII is the option you enable to allow
> MII Management operations to be done.  It should *probably* be called
> CONFIG_MDIO.

Yes, this would be good. Anyone interested in fixing up a patch for this?

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================