[U-Boot-Users] Do we enable Interrupts in U-Boot?

[Chetan Nanda]

On 1/8/08, Stefan Roese <sr at denx.de> wrote:
> On Tuesday 08 January 2008, Chetan Nanda wrote:
> > In that case there must be some threads that continuously check for
> > pending requests from UART, ETHERNET or so ..
>
> Threads? U-Boot is not an full blown OS. No threads are needed in this
> bootloader.
>
> > But I don't find any sort  of threading inside u-boot code
>
> U-Boot "sits" there and waits for some input from the console, or for an
> ethernet reply packet. This can be done using polling without any performance
> penalty.
>
Thanks, for explaining the things,
But how can we wait for two events simultaneously (that is also under
a single thread of execution)? Can you give me pointer to the code ?
> Best regards,
> Stefan
>
> =====================================================================
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
> =====================================================================
>