[U-Boot-Users] [PATCH] PPC440: Add flow control for serial port (Third try)

[Stefan Roese]

Hi Niklaus,

On Monday 17 December 2007, Stefan Roese wrote:
> On Monday 03 December 2007, Niklaus Giger wrote:
> > This has be layouten tested on our HCU5 PPC440EPx based board, where we
> > have only one serial port. Changes compared to my last try are:
> > - HW-flow control is off by default.
> > - returns the  correct state of the hwflow
> > - coding style corrected
>
> I'm (finally) trying to integrate your patches into the u-boot-ppc4xx
> custodian repository for upstream merge. Unfortunately my repo changed
> quite a bit lately and your patches don't apply anymore. So could you
> please rebase this patchset against the "for-1.3.2" branch of the 4xx repo:
>
> http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot/u-boot-ppc4xx.git;a=shortlog
>;h=for-1.3.2
>
> I promise to commit soon so that you don't have to rework again.
>
> Unfortunately this is valid also for this patch too:
>
> [U-Boot-Users] PPC440EPx: Make Sequoia boot vxWorks

Could you please re-check which patches of yours are still missing in the 
current official mainline U-Boot repository? And please rebase all missing 
patches and resend them. Then I'll try to get them in while we are still in 
this looooong merge-window.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================