[U-Boot-Users] [PATCH] MPC8568E-MDS: set up QE pario for UART1

[Timur Tabi]

Anton Vorontsov wrote:
> To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
> be set up appropriately.

On 83xx, the pario pins are configured via the DTS.  So now we have the DTS 
method for 83xx, and U-Boot for 85xx.  Unless there's a U-Boot QE UART driver 
that I don't know about, this configuration should be done in the DTS, not here.

-- 
Timur Tabi
Linux kernel developer at Freescale