[U-Boot-Users] How to define CONFIG_OF_FLAT_TREE?

[samppa at sundmangroup.com]

Hello,
I've made a port of u-boot-1.3.1 to a WindRiver sbc8256 board with
CONFIG_OF_LIBFDT defined.
Is the dtc-1.0.0 usable along with the U-boot version 1.3.1 or do I need
to get a newer dtc?

Cheers // Matias



> jie han wrote:
>> What's different between CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE?
>
> CONFIG_OF_FLAT_TREE was the original FDT interface code and had a
> ...uh... funky interface.  David Gibson wrote a FDT library intended for
> embedded use and CONFIG_OF_LIBFDT uses that.  We've been switching
> processors/boards over.  I believe the switchover is mostly complete.
>
>> My board is mpc8641d and u-boot version is 1.3.1.
>
> No direct experience, but I believe that is good.  Is this a custom
> board or an eval board?  If it is a custom board, you will need to
> generate an appropriate *.dts file by customizing an example.
>
>> I f I define CONFIG_OF_FLAT_TREE,and u-boot command bootm will call
>> ft_setup() function, and how is it work?
>
> With CONFIG_OF_LIBFDT, bootm calls the appropriate board and processor
> setup routines fdt_chosen() and ft_board_setup().
>
> Note that CONFIG_OF_LIBFDT adds the "fdt" command which is very helpful
> for printing out out (and modifying) blob data.
>
>> I found DTS files under kernel /arch/powerpc/sysDev directory,Could
>> you give me some advice how to build it?
>
> You need to build the device tree compiler (dtc).  You can get the
> source from Jon Loeliger's repository:
>    <http://jdl.com/git_repos/>
>
>> Thanks,
>> Jie
>
> [snip]
>
> gvb
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>