[U-Boot-Users] [PATCH v2] QE UEC: Extend number of supported UECs to 4

[David Saada]

Signed-off-by: David Saada <david.saada at ecitele.com>

> diff -purN drivers/qe/uec.c.orig drivers/qe/uec.c
--- drivers/qe/uec.c.orig	2008-01-14 11:48:28.000000000 +0200
+++ drivers/qe/uec.c	2008-01-15 09:42:59.118870000 +0200
@@ -40,8 +40,13 @@ static uec_info_t eth1_uec_info = {
 		.tx_clock	= CFG_UEC1_TX_CLK,
 		.eth_type	= CFG_UEC1_ETH_TYPE,
 	},
+#if (CFG_UEC1_ETH_TYPE == FAST_ETH)
+	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
+#else
 	.num_threads_tx		= UEC_NUM_OF_THREADS_4,
 	.num_threads_rx		= UEC_NUM_OF_THREADS_4,
+#endif
 	.riscTx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
 	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
 	.tx_bd_ring_len		= 16,
@@ -58,8 +63,13 @@ static uec_info_t eth2_uec_info = {
 		.tx_clock	= CFG_UEC2_TX_CLK,
 		.eth_type	= CFG_UEC2_ETH_TYPE,
 	},
+#if (CFG_UEC2_ETH_TYPE == FAST_ETH)
+	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
+#else
 	.num_threads_tx		= UEC_NUM_OF_THREADS_4,
 	.num_threads_rx		= UEC_NUM_OF_THREADS_4,
+#endif
 	.riscTx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
 	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
 	.tx_bd_ring_len		= 16,
@@ -68,7 +78,6 @@ static uec_info_t eth2_uec_info = {
 	.enet_interface		= CFG_UEC2_INTERFACE_MODE,
 };
 #endif
-
 #ifdef CONFIG_UEC_ETH3
 static uec_info_t eth3_uec_info = {
 	.uf_info		= {
@@ -77,8 +86,13 @@ static uec_info_t eth3_uec_info = {
 		.tx_clock	= CFG_UEC3_TX_CLK,
 		.eth_type	= CFG_UEC3_ETH_TYPE,
 	},
+#if (CFG_UEC3_ETH_TYPE == FAST_ETH)
+	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
+#else
 	.num_threads_tx		= UEC_NUM_OF_THREADS_4,
 	.num_threads_rx		= UEC_NUM_OF_THREADS_4,
+#endif
 	.riscTx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
 	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
 	.tx_bd_ring_len		= 16,
@@ -87,6 +101,29 @@ static uec_info_t eth3_uec_info = {
 	.enet_interface		= CFG_UEC3_INTERFACE_MODE,
 };
 #endif
+#ifdef CONFIG_UEC_ETH4
+static uec_info_t eth4_uec_info = {
+	.uf_info		= {
+		.ucc_num	= CFG_UEC4_UCC_NUM,
+		.rx_clock	= CFG_UEC4_RX_CLK,
+		.tx_clock	= CFG_UEC4_TX_CLK,
+		.eth_type	= CFG_UEC4_ETH_TYPE,
+	},
+#if (CFG_UEC4_ETH_TYPE == FAST_ETH)
+	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
+#else
+	.num_threads_tx		= UEC_NUM_OF_THREADS_4,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_4,
+#endif
+	.riscTx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+	.tx_bd_ring_len		= 16,
+	.rx_bd_ring_len		= 16,
+	.phy_address		= CFG_UEC4_PHY_ADDR,
+	.enet_interface		= CFG_UEC4_INTERFACE_MODE,
+};
+#endif
 
 static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
 {
@@ -1262,6 +1299,10 @@ int uec_initialize(int index)
 #ifdef CONFIG_UEC_ETH3
 		uec_info = &eth3_uec_info;
 #endif
+	} else if (index == 3) {
+#ifdef CONFIG_UEC_ETH4
+		uec_info = &eth4_uec_info;
+#endif
 	} else {
 		printf("%s: index is illegal.\n", __FUNCTION__);
 		return -EINVAL;

> diff -purN net/eth.c.orig net/eth.c
--- net/eth.c.orig	2008-01-14 11:48:28.000000000 +0200
+++ net/eth.c	2008-01-14 18:59:56.708822000 +0200
@@ -217,6 +217,9 @@ int eth_initialize(bd_t *bis)
 #if defined(CONFIG_UEC_ETH3)
 	uec_initialize(2);
 #endif
+#if defined(CONFIG_UEC_ETH4)
+	uec_initialize(3);
+#endif
 
 #if defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
 	fec_initialize(bis);