[U-Boot-Users] [PATCH] mpc86xx: Remove CONFIG_OF_FLAT_TREE for sbc8641d
Joe Hamman
joe.hamman at embeddedspecialties.com
Tue Jan 15 14:13:20 CET 2008
Update sbc8641d reference board to use CONFIG_OF_LIBFDT.
Signed-off by: Joe Hamman <joe.hamman at embeddedspecialties.com>
diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c
index 7adc42f..3d1d100 100644
--- a/board/sbc8641d/sbc8641d.c
+++ b/board/sbc8641d/sbc8641d.c
@@ -35,11 +35,8 @@
#include <asm/immap_86xx.h>
#include <asm/immap_fsl_pci.h>
#include <spd.h>
-adc42f..3d1d100 100644
--- a/board/sbc8641d/sbc8641d.c
+++ b/board/sbc8641d/sbc8641d.c
@@ -35,11 +35,8 @@
#inclu
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-extern void ft_cpu_setup (void *blob, bd_t * bd);
-#endif
+#include <libfdt.h>
+#include <fdt_support.h>
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc (unsigned int dram_size);
@@ -341,22 +338,51 @@ void pci_init_board(void)
}
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup (void *blob, bd_t * bd)
+#if defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
{
- u32 *p;
- int len;
+ int node, tmp[2];
+ const char *path;
+
+ fdt_fixup_ethernet(blob, bd);
- ft_cpu_setup (blob, bd);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "timebase-frequency", bd->bi_busfreq / 4, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "clock-frequency", bd->bi_intfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
- p = ft_get_prop (blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32 (bd->bi_memstart);
- *p = cpu_to_be32 (bd->bi_memsize);
+ do_fixup_by_compat_u32(blob, "ns16550",
+ "clock-frequency", bd->bi_busfreq, 1);
+
+ fdt_fixup_memory(blob, bd->bi_memstart, bd->bi_memsize);
+
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
+#ifdef CONFIG_PCI1
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+#ifdef CONFIG_PCI2
+ path = fdt_getprop(blob, node, "pci1", NULL);
+ if (path) {
+ tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
}
}
#endif
+
void sbc8641d_reset_board (void)
{
puts ("Resetting board....\n");
diff --git a/config.mk b/config.mk
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index 54eac38..2c8da6e 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -267,13 +267,9 @@
/*
* Pass open firmware flat tree to kernel
*/
-#define CONFIG_OF_FLAT_TREE 1
-#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8641 at 0"
-#define OF_SOC "soc at f8000000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc at f8000000/serial at 4500"
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
#define CFG_64BIT_VSPRINTF 1
#define CFG_64BIT_STRTOUL 1
More information about the U-Boot
mailing list