[U-Boot-Users] MMC 4GB with at91sam9260 ...

[Pierre Savary]

I can't read on the MMC. When I make "mmcinit" :
Manufacturer ID:       15
OEM/Application ID:    0000
Product name:          000000
Product Revision:      1.11
Product Serial Number: 2701132109
Manufacturing Date:    00/10
CSD data: 9026012a 0f5903d3 f6dbffe9 96404093
Supports partial reads
Does not support partial writes
Card capacity:          556032 bytes
Write protection:
max_blksz = 1

and when I make "ext2load" :
....Failed to mount ext2 filesystem...
** Bad ext2 partition or disk - mmc 0:1 ** 

Thanks for your help,
Regards

Pierre


-----Message d'origine-----
De : u-boot-users-bounces at lists.sourceforge.net
[mailto:u-boot-users-bounces at lists.sourceforge.net] De la part de Andy
Fleming
Envoyé : mardi 15 janvier 2008 17:18
À : Pierre Savary
Cc : U-Boot-Users
Objet : Re: [U-Boot-Users] MMC 4GB with at91sam9260 ...

On Jan 15, 2008 1:49 AM, Pierre Savary <pierre.savary at kerlink.fr> wrote:
> Hi,
> I need some help because I want to use an eMMC of 4GB but my U-Boot
(1.1.5)
> see it but can't use it... So I think it is a problem with "Max read data
> block length" but I don't know what I can change in the code ...
> Have somebody already try this?
> Could you help me please?


What kind of error do you get?

Andy

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users