[U-Boot-Users] [PATCH (RESUBMIT)] ppc4xx: Refactor ECC POST for AMCC Denali core

[Stefan Roese]

On Tuesday 15 January 2008, Larry Johnson wrote:
> The ECC POST reported intermittent failures running after power-up on
> the Korat PPC440EPx board.  Even when the test passed, the debugging
> output occasionally reported additional unexpected ECC errors.
>
> This refactoring has three main objectives: (1) minimize the code
> executed with ECC enabled during the tests, (2) add more checking of the
> results so any unexpected ECC errors would cause the test to fail, and
> (3) use synchronization (only) where required by the processor.
>
> Signed-off-by: Larry Johnson <lrj at acm.org>

Applied, thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================