[U-Boot-Users] [PATCH 3/3] Add support for AT91CAP9 cpu and AT91CAP9A-DK board

[Stelian Pop]

Le vendredi 18 janvier 2008 à 09:45 +0100, Haavard Skinnemoen a écrit :
> On Wed, 16 Jan 2008 11:38:17 +0100
> Stelian Pop <stelian at popies.net> wrote:
> 
> > diff --git a/drivers/net/macb.c b/drivers/net/macb.c
[...]

> Cool, I always was curious about whether post-rm9200 AT91 chips could
> use this driver too. 

There are other avr32 drivers we should be able to use, for example
usba.

> The changes you've done nicely match the Linux
> driver, so ACK on this part from me. If you had submitted one patch
> per
> driver (aka per logical change ;-) I could have acked a whole patch,
> not only part of it. If you need to resend, I recommend that you do
> that, and send them before the actual cpu- and board support; that way
> they can be applied independently as soon as each one is ready.

Well, the macb changes is the only logical change outside for cpu/ and
board/ directories (except for a few #ifdefs in
drivers/mtd/dataflash.c...).

Thanks,

Stelian.
-- 
Stelian Pop <stelian at popies.net>