[U-Boot-Users] [ARM] Add support for AT91CAP9 cpu andAT91CAP9A-DK board

[Jean-Christophe PLAGNIOL-VILLARD]

Hi,

If possible can we keep the all register definition.

Best Regards,
J.

Le 26 janv. 08 à 09:24, Stelian Pop <stelian at popies.net> a écrit :

>
> Le samedi 26 janvier 2008 à 01:01 +0100, Wolfgang Denk a écrit :
>> In message <1201288627.12296.4.camel at voyager.dsnet> you wrote:
>>>
>>> As I said in my original posting:
>>>
>>>> For size reasons, the patch has been hand edited, splitted in  
>>>> several
>>>> chunks, and the AT91CAP9.h file (440 kB !) is not in the patch at  
>>>> all.
>>
>> Will you pelase check this file? Only the insane
>> include/asm-arm/mach-types.h has a similar size - al other files are
>> usually much smaller.
>>
>> Is this stuff really all needed?
>
> This header file comes directly from Atmel: it contains the register
> definitions for _all_ the hardware on the AT91CAP9.
>
> Of course, u-boot does only need a (small) subset of it. If you  
> prefer,
> I can simplify it.
>
> Thanks,
>
> Stelian.
> -- 
> Stelian Pop <stelian at popies.net>
>
>
> --- 
> ----------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users