[U-Boot-Users] [PATCH 2/4] [ARM] Added Artila M-501 config file

Timo Tuunainen timo.tuunainen at sysart.fi
Thu Jan 31 09:17:55 CET 2008


Signed-off-by: Timo Tuunainen <timo.tuunainen at sysart.fi>
---
include/configs/m501sk.h | 220 
++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 220 insertions(+), 0 deletions(-)
create mode 100644 include/configs/m501sk.h

diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h
new file mode 100644
index 0000000..aad99fd
--- /dev/null
+++ b/include/configs/m501sk.h
@@ -0,0 +1,220 @@
+/*
+ * Based on Modifications by Alan Lu / Artila and
+ * Rick Bronson <rick at efn.org>
+ *
+ * Configuation settings for the Artila M-501 starter kit with V02 
processor card.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 
/ 4 * 39) */
+#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock 
(AT91C_MASTER_CLOCK / 3) */
+#define AT91_SLOW_CLOCK 32768 /* slow clock */
+
+#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/* define this to include the functionality of boot.bin in u-boot */
+#undef CONFIG_BOOTBINFUNC
+#undef CONFIG_AUTOBOOT_PROMPT
+#define CONFIG_MENUPROMPT "."
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
+#define CONFIG_BAUDRATE 115200
+
+#define CFG_AT91C_BRGR_DIVISOR 33 /* hardcode so no __divsi3 : 
AT91C_MASTER_CLOCK / baudrate / 16 */
+
+/*
+ * Hardware drivers
+ */
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_CFI_DRIVER 1
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CFG_FLASH_USE_BUFFER_WRITE
+#define CFG_FLASH_PROTECTION /*for Intel P30 Flash*/
+#define CONFIG_HARD_I2C
+#define CFG_I2C_SPEED 100
+#define CFG_I2C_SLAVE 0
+#define CFG_CONSOLE_INFO_QUIET
+#undef CFG_ENV_IS_IN_EEPROM
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_AT24C16
+#define CFG_I2C_RTC_ADDR 0x32
+#undef CONFIG_RTC_DS1338
+#define CONFIG_RTC_RS5C372A
+#undef CONFIG_POST
+#define CONFIG_M501SK
+#define CONFIG_CMC_PU2
+
+/* define one of these to choose the DBGU, USART0 or USART1 as console */
+#define CONFIG_DBGU
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+
+#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
+#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
+
+#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200 
initrd=0x20800000,8192000 ramdisk_size=15360 root=/dev/ram0 rw 
mtdparts=phys_mapped_flash:128k(loader)ro,128k(reserved)ro,1408k(linux)ro,2560k(ramdisk)ro,-(userdisk)"
+#define CONFIG_BOOTCOMMAND "bootm 10040000 101a0000"
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_IPADDR 192.168.1.100
+#define CONFIG_SERVERIP 192.168.1.1
+#define CONFIG_GATEWAYIP 192.168.1.254
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_BOOTFILE uImage
+#define CONFIG_ETHADDR 00:13:48:aa:bb:cc
+#define CONFIG_ENV_OVERWRITE 1
+#define BOARD_LATE_INIT
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "unlock=yes\0"
+
+#define CFG_CMD_JFFS2
+#undef CONFIG_CMD_EEPROM
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_POST
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_ENV
+
+#define CFG_HUSH_PARSER
+#define CONFIG_AUTO_COMPLETE
+#define CFG_PROMPT_HUSH_PS2 ">>"
+
+#define CFG_MAX_NAND_DEVICE 0 /* Max number of NAND devices */
+#define SECTORSIZE 512
+
+#define ADDR_COLUMN 1
+#define ADDR_PAGE 2
+#define ADDR_COLUMN_PAGE 3
+
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x20000000
+#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */
+
+#define CFG_MEMTEST_START 0x21000000 /* PHYS_SDRAM */
+#define CFG_MEMTEST_END 0x00100000 /* CFG_MEMTEST_START + 
PHYS_SDRAM_SIZE - 262144 */
+
+#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_AT91C_USE_RMII
+
+#define PHYS_FLASH_1 0x10000000
+#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
+#define CFG_FLASH_BASE PHYS_FLASH_1
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 256
+#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
+
+#ifdef CFG_ENV_IS_IN_DATAFLASH
+#define CFG_ENV_OFFSET 0x20000
+#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
+#define CFG_ENV_SIZE 0x2000
+#else
+#define CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_BOOTBINFUNC
+#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x60000)
+#define CFG_ENV_SIZE 0x10000
+#else
+#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x00020000)
+#define CFG_ENV_SIZE 2048
+#endif
+#endif
+
+#ifdef CFG_ENV_IS_IN_EEPROM
+#define CFG_ENV_OFFSET 1024
+#define CFG_ENV_SIZE 1024
+#endif
+
+#define CFG_LOAD_ADDR 0x21000000 /* default load address */
+
+/* use for protect flash sectors */
+#ifdef CONFIG_BOOTBINFUNC
+#define CFG_BOOT_SIZE 0x00 /* 0 KBytes */
+#define CFG_U_BOOT_BASE PHYS_FLASH_1
+#define CFG_U_BOOT_SIZE 0x60000 /* 384 KBytes */
+#else
+#define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */
+#define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000)
+#define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */
+#endif
+
+#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 512 /* Console I/O Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer 
Size */
+
+#ifndef __ASSEMBLY__
+/*-----------------------------------------------------------------------
+ * Board specific extension for bd_info
+ *
+ * This structure is embedded in the global bd_info (bd_t) structure
+ * and can be used by the board specific code (eg board/...)
+ */
+
+struct bd_info_ext {
+ /* helper variable for board environment handling
+ *
+ * env_crc_valid == 0 => uninitialised
+ * env_crc_valid > 0 => environment crc in flash is valid
+ * env_crc_valid < 0 => environment crc in flash is invalid
+ */
+ int env_crc_valid;
+};
+#endif
+
+#define CFG_HZ 1000
+#define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2
+ /* AT91C_TC0_CMR is implicitly set to AT91C_TC_TIMER_DIV1_CLOCK */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
-- 
1.5.2.5





More information about the U-Boot mailing list