[U-Boot-Users] Standalone hello_world, data abort error on ARM926 (AP)

[Peter Pearse]

> -----Original Message-----
> From: u-boot-users-bounces at lists.sourceforge.net 
> [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf 
> Of iismail
> Sent: 31 January 2008 03:00
> To: u-boot-users at lists.sourceforge.net
> Subject: [U-Boot-Users] Standalone hello_world, data abort 
> error on ARM926 (AP)
> 
> 
> Hi all,
> 
> I am having problem running the "hello_world" examples that 
> comes with u-boot on ARM926 board.

---snip

> 
> Then i load and run the standalone program "hello_world.bin" as follow
> 
> VersatileAB # tftp 0xc100000 hello_world.bin Using MAC 

How did you come to choose 0xc1000000 - which as you say is Reserved?

Unless you have modified your AB accordingly you must expect problems
using a reserved address....

Try somewhere in SDRAM 0x000000 - 0x07FFFFFF
(depending on your switch settings) as per your manual

Regards

Peter