[U-Boot-Users] Ethernet support for LAN91C111

[Shinose]

On Tue, Jul 1, 2008 at 7:42 PM, Ben Warren <biggerbadderben at gmail.com>
wrote:

> Hi Naveen,
>
> On Tue, Jul 1, 2008 at 7:02 AM, navin karnam <navin.karnam at gmail.com>
> wrote:
> >
> > Hi,
> >
> > I have pxa255 board and one Ethernet controller LAN91C111-Nu (10/100 Base
> T)
> > attached to it.
> > Does u-boot code supports this type of Ethernet controller? Can anybody
> tell
> > what are the changes that need to be done to make this Ethernet
> controller
> > work? If not how do i had the support for it?
> >
>
> I believe the LNA91C111 is software compatible with the LAN91xx, but
> don't know for sure.  If this is true, you should be able to use the
> driver called 'smc9111.c'.  Be sure to get the latest version of the
> code base from git.denx.de.
>
> regards,
> Ben
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>


Hi Naveen,

The driver support the SMSC chip 9111 on any platform if you have a 32 bit
wide databus. For other bus widths you need to customize the driver.

Thanks & Regards,
Shinose.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080702/b9744d07/attachment.htm