[U-Boot-Users] [PATCH 1/1] Fix I2C for m547x/548x and m5445x processors.
Luigi 'Comio' Mantellini
luigi.mantellini at idf-hit.com
Mon Jul 7 16:08:35 CEST 2008
---
drivers/i2c/fsl_i2c.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 68 insertions(+), 0 deletions(-)
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index 0690340..8fd73c0 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -78,6 +78,73 @@ static const struct fsl_i2c *i2c_dev[2] = {
* register. See the application note AN2919 "Determining the I2C Frequency
* Divider Ratio for SCL"
*/
+#if defined(CONFIG_MCF547x_8x) || defined(CONFIG_MCF5445x)
+static const struct {
+ u8 fdr;
+ unsigned short divider;
+} fsl_i2c_speed_map[] = {
+ {.fdr=0x20, .divider= 20}, {.fdr=0x21, .divider= 22}, {.fdr=0x22, .divider= 24},
+ {.fdr=0x23, .divider= 26}, {.fdr=0x00, .divider= 28}, {.fdr=0x24, .divider= 28},
+ {.fdr=0x01, .divider= 30}, {.fdr=0x25, .divider= 32}, {.fdr=0x02, .divider= 34},
+ {.fdr=0x26, .divider= 36}, {.fdr=0x03, .divider= 40}, {.fdr=0x27, .divider= 40},
+ {.fdr=0x04, .divider= 44}, {.fdr=0x05, .divider= 48}, /*{.fdr=0x28, .divider= 48},*/
+ {.fdr=0x06, .divider= 56}, /*{.fdr=0x29, .divider= 56},*/ {.fdr=0x2A, .divider= 64},
+ {.fdr=0x07, .divider= 68}, {.fdr=0x2B, .divider= 72}, {.fdr=0x08, .divider= 80},
+ /*{.fdr=0x2C, .divider= 80},*/ {.fdr=0x09, .divider= 88}, {.fdr=0x2D, .divider= 96},
+ {.fdr=0x0A, .divider= 104}, {.fdr=0x2E, .divider= 112}, {.fdr=0x0B, .divider= 128},
+ /*{.fdr=0x2F, .divider= 128},*/ {.fdr=0x0C, .divider= 144}, {.fdr=0x0D, .divider= 160},
+ /*{.fdr=0x30, .divider= 160},*/ {.fdr=0x0E, .divider= 192}, /*{.fdr=0x31, .divider= 192},*/
+ {.fdr=0x32, .divider= 224}, {.fdr=0x0F, .divider= 240}, {.fdr=0x33, .divider= 256},
+ {.fdr=0x10, .divider= 288}, {.fdr=0x11, .divider= 320}, /*{.fdr=0x34, .divider= 320},*/
+ {.fdr=0x12, .divider= 384}, /*{.fdr=0x35, .divider= 384},*/ {.fdr=0x36, .divider= 448},
+ /*{.fdr=0x13, .divider= 480},*/ {.fdr=0x37, .divider= 512}, {.fdr=0x14, .divider= 576},
+ {.fdr=0x15, .divider= 640}, /*{.fdr=0x38, .divider= 640},*/ {.fdr=0x16, .divider= 768},
+ /*{.fdr=0x39, .divider= 768},*/ {.fdr=0x3A, .divider= 896}, {.fdr=0x17, .divider= 960},
+ {.fdr=0x3B, .divider=1024}, {.fdr=0x18, .divider=1152}, {.fdr=0x19, .divider=1280},
+ /*{.fdr=0x3C, .divider=1280},*/ {.fdr=0x1A, .divider=1536}, /*{.fdr=0x3D, .divider=1536},*/
+ {.fdr=0x3E, .divider=1792}, {.fdr=0x1B, .divider=1920}, {.fdr=0x3F, .divider=2048},
+ {.fdr=0x1C, .divider=2304}, {.fdr=0x1D, .divider=2560}, {.fdr=0x1E, .divider=3072},
+ {.fdr=0x1F, .divider=3840}, {.fdr=0x00, .divider=-1}
+};
+
+/**
+ * Set the I2C bus speed for a given I2C device
+ *
+ * @param dev: the I2C device
+ * @i2c_clk: I2C bus clock frequency
+ * @speed: the desired speed of the bus
+ *
+ * The I2C device must be stopped before calling this function.
+ *
+ * The return value is the actual bus speed that is set.
+ */
+static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev,
+ unsigned int i2c_clk, unsigned int speed)
+{
+ unsigned short divider = min(i2c_clk / speed, (unsigned short) -1);
+ unsigned int i;
+ u8 fdr = 0;
+
+ /*
+ * We want to choose an FDR/DFSR that generates an I2C bus speed that
+ * is equal to or lower than the requested speed. That means that we
+ * want the first divider that is equal to or greater than the
+ * calculated divider.
+ */
+
+ for (i = 0; i < ARRAY_SIZE(fsl_i2c_speed_map); i++)
+ if (fsl_i2c_speed_map[i].divider >= divider) {
+ fdr = fsl_i2c_speed_map[i].fdr;
+ speed = i2c_clk / fsl_i2c_speed_map[i].divider;
+ break;
+ }
+
+ writeb(fdr, &dev->fdr); /* set bus speed */
+
+ return speed;
+}
+#else /* ! (defined(CONFIG_MCF547x_8x) || defined(CONFIG_MCF5445x) */
+
static const struct {
unsigned short divider;
u8 dfsr;
@@ -140,6 +207,7 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev,
return speed;
}
+#endif /* if (defined(CONFIG_MCF547x_8x) || defined(CONFIG_MCF5445x) */
void
i2c_init(int speed, int slaveadd)
--
1.5.4.3
More information about the U-Boot
mailing list