[U-Boot-Users] [PATCH 1/2] fdt_support: fdt_fixup_dr_usb: add support for phy_type fixups

[Anton Vorontsov]

Currently U-Boot can only fixup the usb dr_mode, but some boards (namely
MPC8315E-RDB) can use two PHY types: ULPI (stand-alone OTG port) or UTMI
(connected to the four-ports hub, usb host only).

This patch implements support for passing Dual-Role USB controller's
device tree property phy_type through the usb_phy_type environment
variable.

Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
---
 common/fdt_support.c |   30 +++++++++++++++++++++++-------
 1 files changed, 23 insertions(+), 7 deletions(-)

diff --git a/common/fdt_support.c b/common/fdt_support.c
index 3828228..24bbed0 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -422,23 +422,39 @@ void fdt_fixup_ethernet(void *fdt, bd_t *bd)
 void fdt_fixup_dr_usb(void *blob, bd_t *bd)
 {
 	char *mode;
+	char *type;
 	const char *compat = "fsl-usb2-dr";
-	const char *prop = "dr_mode";
+	const char *prop_mode = "dr_mode";
+	const char *prop_type = "phy_type";
 	int node_offset;
 	int err;
 
 	mode = getenv("usb_dr_mode");
-	if (!mode)
+	type = getenv("usb_phy_type");
+	if (!mode && !type)
 		return;
 
 	node_offset = fdt_node_offset_by_compatible(blob, 0, compat);
-	if (node_offset < 0)
+	if (node_offset < 0) {
 		printf("WARNING: could not find compatible node %s: %s.\n",
 			compat, fdt_strerror(node_offset));
+		return;
+	}
 
-	err = fdt_setprop(blob, node_offset, prop, mode, strlen(mode) + 1);
-	if (err < 0)
-		printf("WARNING: could not set %s for %s: %s.\n",
-		       prop, compat, fdt_strerror(err));
+	if (mode) {
+		err = fdt_setprop(blob, node_offset, prop_mode, mode,
+				  strlen(mode) + 1);
+		if (err < 0)
+			printf("WARNING: could not set %s for %s: %s.\n",
+			       prop_mode, compat, fdt_strerror(err));
+	}
+
+	if (type) {
+		err = fdt_setprop(blob, node_offset, prop_type, type,
+				  strlen(type) + 1);
+		if (err < 0)
+			printf("WARNING: could not set %s for %s: %s.\n",
+			       prop_type, compat, fdt_strerror(err));
+	}
 }
 #endif /* CONFIG_HAS_FSL_DR_USB */
-- 
1.5.5.4