[U-Boot-Users] [PATCH 0/2] Coldfire Ethernet initialization changes

[Liew Tsi Chung]

Ben,

> I'm pushing these patches to a 'testing' branch on the net repo.
Please clone it as follows:
> $ git clone git://git.denx.de/u-boot-net.git $ cd u-boot-net $ git
checkout testing
There is no testing branch in u-boot-net, so I applied the two patches
you sent on top of current u-boot-net tree (commit
63676841ca2d603b13765f3f7b72ff1a61c23f90 - Jun 18. Remove duplicate code
in cpu/arm926ejs/davinci/lxt972.c).

Only one conflict and error:
The first patch - CONFIG_FSLDMAFEC for 547x_8x and is correct.
Then, the second patch - CONFIG_MCFFEC, appended #if after ||, either
remove CONFIG_MCFFEC for 547x_8x or remove "#if ".

-#if defined(CONFIG_FSLDMAFEC)
+#if defined(CONFIG_FSLDMAFEC) || #if defined(CONFIG_MCFFEC)
+/* Default initializations for MCFFEC controllers.  To override,
+ * create a board-specific function called:
+ * 	int board_eth_init(bd_t *bis)
+ */
+
 extern int mcdmafec_initialize(bd_t *bis);
+extern int mcffec_initialize(bd_t*);

Thanks!

Regards,
TsiChung
 

-----Original Message-----
From: Ben Warren [mailto:biggerbadderben at gmail.com] 
Sent: Thursday, July 03, 2008 2:07 AM
To: Liew Tsi Chung; u-boot-users at lists.sourceforge.net
Cc: Ben Warren
Subject: [PATCH 0/2] Coldfire Ethernet initialization changes

These two patches move the default initialization of Coldfire FEC
controllers to cpu_eth_init() in the CPU directories.

I don't have a Coldfire cross compiler set up nor do I have any
hardware, so I'm looking for volunteers to do the following:

1. Run 'MAKEALL coldfire' to check for compile-time errors 2. Try the
code out on real hardware

I'm pushing these patches to a 'testing' branch on the net repo.  Please
clone it as follows:

$ git clone git://git.denx.de/u-boot-net.git $ cd u-boot-net $ git
checkout testing

thanks!
Ben