[U-Boot-Users] [PATCH 3/3] ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board.

fkan at amcc.com fkan at amcc.com
Wed Jul 9 07:48:42 CEST 2008


From: Feng Kan <fkan at amcc.com>

Add AMCC Redwood reference board that uses the latest
PPC 464 CPU processor combined with a rich mix of peripheral
controllers. The board will support PCIe, mutiple Gig ethernet
ports, advanced hardware RAID assistance and IEEE 1588.

Signed-off-by: Feng Kan <fkan at amcc.com>
---
 MAINTAINERS                   |    3 +
 MAKEALL                       |    1 +
 Makefile                      |    3 +
 board/amcc/redwood/Makefile   |   50 ++++
 board/amcc/redwood/config.mk  |   42 ++++
 board/amcc/redwood/init.S     |   77 +++++++
 board/amcc/redwood/redwood.c  |  492 +++++++++++++++++++++++++++++++++++++++++
 board/amcc/redwood/redwood.h  |   50 ++++
 board/amcc/redwood/u-boot.lds |  147 ++++++++++++
 9 files changed, 865 insertions(+), 0 deletions(-)
 create mode 100644 board/amcc/redwood/Makefile
 create mode 100644 board/amcc/redwood/config.mk
 create mode 100644 board/amcc/redwood/init.S
 create mode 100644 board/amcc/redwood/redwood.c
 create mode 100644 board/amcc/redwood/redwood.h
 create mode 100644 board/amcc/redwood/u-boot.lds

diff --git a/MAINTAINERS b/MAINTAINERS
index a3d70b1..a4637fd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -420,6 +420,9 @@ Guennadi Liakhovetski <g.liakhovetski at gmx.de>
 
 	linkstation		MPC8241
 
+Feng Kan <fkan at amcc.com>
+
+	redwood			PPC4xx
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
diff --git a/MAKEALL b/MAKEALL
index 32caab7..566e63a 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -221,6 +221,7 @@ LIST_4xx="		\
 	PPChameleonEVB	\
 	quad100hd	\
 	rainier		\
+	redwood		\
 	sbc405		\
 	sc3		\
 	sequoia		\
diff --git a/Makefile b/Makefile
index 8bfc891..ff38e0c 100644
--- a/Makefile
+++ b/Makefile
@@ -1417,6 +1417,9 @@ rainier_nand_config: unconfig
 	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 
+redwood_config: unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc
+
 sc3_config:unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
 
diff --git a/board/amcc/redwood/Makefile b/board/amcc/redwood/Makefile
new file mode 100644
index 0000000..a8bdb05
--- /dev/null
+++ b/board/amcc/redwood/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2008
+# Feng Kan, Applied Micro Circuits Corp., fkan at amcc.com.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o 
+SOBJS	= init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/amcc/redwood/config.mk b/board/amcc/redwood/config.mk
new file mode 100644
index 0000000..531d9d3
--- /dev/null
+++ b/board/amcc/redwood/config.mk
@@ -0,0 +1,42 @@
+#
+# (C) Copyright 2008
+# Feng Kan, Applied Micro Circuits Corp., fkan at amcc.com.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# AMCC 460SX Reference Platform (redwood) board
+#
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0x07FD0000
+else
+TEXT_BASE = 0xfffb0000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1 
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/amcc/redwood/init.S b/board/amcc/redwood/init.S
new file mode 100644
index 0000000..876f96a
--- /dev/null
+++ b/board/amcc/redwood/init.S
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2008
+ * Feng Kan, Applied Micro Circuits Corp., fkan at amcc.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+#include <asm-ppc/mmu.h>
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+	.section .bootpg,"ax"
+	.globl tlbtab
+tlbtab:
+	tlbtab_start
+
+	/*
+	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+	 * speed up boot process. It is patched after relocation to enable SA_I
+	 */
+	tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
+
+	/*
+	 * TLB entries for SDRAM are not needed on this platform.
+	 * They are dynamically generated in the SPD DDR(2) detection
+	 * routine.
+	 */
+
+	/* Although 512 KB, map 256k at a time */
+	tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+	tlbentry(CFG_ISRAM_BASE + 0x40000, SZ_256K, 0x00040000, 4, AC_R|AC_W|AC_X|SA_I)
+
+	tlbentry(CFG_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
+	
+	/*
+	 * Peripheral base 
+	 */
+	tlbentry(CFG_PERIPHERAL_BASE, SZ_16K, 0xEF600000, 4, AC_R|AC_W|SA_G|SA_I)
+
+	tlbentry(CFG_PCIE0_XCFGBASE,SZ_16M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I) 
+	tlbentry(CFG_PCIE1_XCFGBASE,SZ_16M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) 
+	tlbentry(CFG_PCIE2_XCFGBASE,SZ_16M, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I) 
+    
+	tlbentry(CFG_PCIE0_MEMBASE, SZ_256M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE1_MEMBASE, SZ_256M, 0x00000000, 0xE, AC_R|AC_W|SA_G|SA_I)
+
+	tlbentry(CFG_PCIE0_REGBASE, SZ_64K, 0x30000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE1_REGBASE, SZ_64K, 0x30010000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE2_REGBASE, SZ_64K, 0x30020000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbtab_end
diff --git a/board/amcc/redwood/redwood.c b/board/amcc/redwood/redwood.c
new file mode 100644
index 0000000..8f93fc5
--- /dev/null
+++ b/board/amcc/redwood/redwood.c
@@ -0,0 +1,492 @@
+/*
+ * This is the main board level file for the Redwood AMCC board.
+ * 
+ * (C) Copyright 2008
+ * Feng Kan, Applied Micro Circuits Corp., fkan at amcc.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include "redwood.h"
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include <asm-ppc/io.h>
+
+int compare_to_true(char *str);
+char *remove_l_w_space(char *in_str);
+char *remove_t_w_space(char *in_str);
+int get_console_port(void);
+
+static void early_init_EBC(void);
+static int bootdevice_selected(void);
+static void early_reinit_EBC(int);
+static void early_init_UIC(void);
+
+/*----------------------------------------------------------------------------+
+| Define Boot devices
++----------------------------------------------------------------------------*/
+#define BOOT_FROM_8BIT_SRAM			0x00
+#define BOOT_FROM_16BIT_SRAM			0x01
+#define BOOT_FROM_32BIT_SRAM			0x02
+#define BOOT_FROM_8BIT_NAND			0x03
+#define BOOT_FROM_16BIT_NOR			0x04
+#define BOOT_DEVICE_UNKNOWN			0xff
+
+/*----------------------------------------------------------------------------+
+| EBC Devices Characteristics
+|   Peripheral Bank Access Parameters       -   EBC_BxAP
+|   Peripheral Bank Configuration Register  -   EBC_BxCR
++----------------------------------------------------------------------------*/
+
+/*
+ * 8 bit width SRAM
+ * BU Value
+ * BxAP : 0x03800000  - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
+ * B0CR : 0xff098000  - BAS = ff0 - 100 11 00 0000000000000
+ * B2CR : 0xe7098000  - BAS = e70 - 100 11 00 0000000000000
+ */
+#define EBC_BXAP_8BIT_SRAM              EBC_BXAP_BME_DISABLED   | \
+                                        EBC_BXAP_TWT_ENCODE(7)  | \
+                                        EBC_BXAP_BCE_DISABLE    | \
+                                        EBC_BXAP_BCT_2TRANS     | \
+                                        EBC_BXAP_CSN_ENCODE(0)  | \
+                                        EBC_BXAP_OEN_ENCODE(0)  | \
+                                        EBC_BXAP_WBN_ENCODE(0)  | \
+                                        EBC_BXAP_WBF_ENCODE(0)  | \
+                                        EBC_BXAP_TH_ENCODE(0)   | \
+                                        EBC_BXAP_RE_DISABLED    | \
+                                        EBC_BXAP_SOR_DELAYED    | \
+                                        EBC_BXAP_BEM_WRITEONLY  | \
+                                        EBC_BXAP_PEN_DISABLED
+
+#define EBC_BXAP_16BIT_SRAM	EBC_BXAP_8BIT_SRAM
+#define EBC_BXAP_32BIT_SRAM	EBC_BXAP_8BIT_SRAM
+
+/*
+ * NAND flash
+ * BU Value
+ * BxAP : 0x048ff240  - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
+ * B0CR : 0xff09a000  - BAS = ff0 - 100 11 01 0000000000000
+ * B2CR : 0xe709a000  - BAS = e70 - 100 11 01 0000000000000
+*/
+#define EBC_BXAP_NAND                   EBC_BXAP_BME_DISABLED   | \
+                                        EBC_BXAP_TWT_ENCODE(7)  | \
+                                        EBC_BXAP_BCE_DISABLE    | \
+                                        EBC_BXAP_BCT_2TRANS     | \
+                                        EBC_BXAP_CSN_ENCODE(0)  | \
+                                        EBC_BXAP_OEN_ENCODE(0)  | \
+                                        EBC_BXAP_WBN_ENCODE(0)  | \
+                                        EBC_BXAP_WBF_ENCODE(0)  | \
+                                        EBC_BXAP_TH_ENCODE(0)   | \
+                                        EBC_BXAP_RE_DISABLED    | \
+                                        EBC_BXAP_SOR_DELAYED    | \
+                                        EBC_BXAP_BEM_WRITEONLY  | \
+                                        EBC_BXAP_PEN_DISABLED
+
+/*
+ * NOR flash
+ * BU Value
+ * BxAP : 0x048ff240  - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
+ * B0CR : 0xff09a000  - BAS = ff0 - 100 11 01 0000000000000
+ * B2CR : 0xe709a000  - BAS = e70 - 100 11 01 0000000000000
+*/
+#define EBC_BXAP_NOR                    EBC_BXAP_BME_DISABLED   | \
+                                        EBC_BXAP_TWT_ENCODE(7)  | \
+                                        EBC_BXAP_BCE_DISABLE    | \
+                                        EBC_BXAP_BCT_2TRANS     | \
+                                        EBC_BXAP_CSN_ENCODE(0)  | \
+                                        EBC_BXAP_OEN_ENCODE(0)  | \
+                                        EBC_BXAP_WBN_ENCODE(0)  | \
+                                        EBC_BXAP_WBF_ENCODE(0)  | \
+                                        EBC_BXAP_TH_ENCODE(0)   | \
+                                        EBC_BXAP_RE_DISABLED    | \
+                                        EBC_BXAP_SOR_DELAYED    | \
+                                        EBC_BXAP_BEM_WRITEONLY  | \
+                                        EBC_BXAP_PEN_DISABLED
+
+/*
+ * FPGA
+ * BU value :
+ * B1AP = 0x05895240  - 0 00001011 0 00 10 01 01 01 001 0 0 1 0 00000
+ * B1CR = 0xe201a000  - BAS = e20 - 000 11 01 00000000000000
+ */
+#define EBC_BXAP_FPGA                   EBC_BXAP_BME_DISABLED   | \
+                                        EBC_BXAP_TWT_ENCODE(11) | \
+                                        EBC_BXAP_BCE_DISABLE    | \
+                                        EBC_BXAP_BCT_2TRANS     | \
+                                        EBC_BXAP_CSN_ENCODE(10) | \
+                                        EBC_BXAP_OEN_ENCODE(1)  | \
+                                        EBC_BXAP_WBN_ENCODE(1)  | \
+                                        EBC_BXAP_WBF_ENCODE(1)  | \
+                                        EBC_BXAP_TH_ENCODE(1)   | \
+                                        EBC_BXAP_RE_DISABLED    | \
+                                        EBC_BXAP_SOR_DELAYED    | \
+                                        EBC_BXAP_BEM_RW         | \
+                                        EBC_BXAP_PEN_DISABLED
+
+#define EBC_BXCR_8BIT_SRAM_CS0          EBC_BXCR_BAS_ENCODE(0xFFE00000) | \
+                                        EBC_BXCR_BS_1MB                 | \
+                                        EBC_BXCR_BU_RW                  | \
+                                        EBC_BXCR_BW_8BIT
+
+#define EBC_BXCR_32BIT_SRAM_CS0         EBC_BXCR_BAS_ENCODE(0xFFC00000) | \
+                                        EBC_BXCR_BS_1MB                 | \
+                                        EBC_BXCR_BU_RW                  | \
+                                        EBC_BXCR_BW_32BIT
+
+#define EBC_BXCR_NAND_CS0               EBC_BXCR_BAS_ENCODE(0xFF000000) | \
+                                        EBC_BXCR_BS_16MB               | \
+                                        EBC_BXCR_BU_RW                  | \
+                                        EBC_BXCR_BW_8BIT
+
+#define EBC_BXCR_16BIT_SRAM_CS0         EBC_BXCR_BAS_ENCODE(0xFFE00000) | \
+                                        EBC_BXCR_BS_2MB                 | \
+                                        EBC_BXCR_BU_RW                  | \
+                                        EBC_BXCR_BW_16BIT
+
+#define EBC_BXCR_NOR_CS0                EBC_BXCR_BAS_ENCODE(0xFF000000) | \
+                                        EBC_BXCR_BS_16MB                | \
+                                        EBC_BXCR_BU_RW                  | \
+                                        EBC_BXCR_BW_16BIT
+
+#define EBC_BXCR_NOR_CS1                EBC_BXCR_BAS_ENCODE(0xE0000000) | \
+                                        EBC_BXCR_BS_128MB               | \
+                                        EBC_BXCR_BU_RW                  | \
+                                        EBC_BXCR_BW_16BIT
+
+#define EBC_BXCR_NAND_CS1               EBC_BXCR_BAS_ENCODE(0xE0000000) | \
+                                        EBC_BXCR_BS_128MB               | \
+                                        EBC_BXCR_BU_RW                  | \
+                                        EBC_BXCR_BW_8BIT
+
+#define EBC_BXCR_NAND_CS2               EBC_BXCR_BAS_ENCODE(0xC0000000) | \
+                                        EBC_BXCR_BS_128MB                | \
+                                        EBC_BXCR_BU_RW                  | \
+                                        EBC_BXCR_BW_8BIT
+
+#define EBC_BXCR_SRAM_CS2               EBC_BXCR_BAS_ENCODE(0xC0000000) | \
+                                        EBC_BXCR_BS_4MB                | \
+                                        EBC_BXCR_BU_RW                  | \
+                                        EBC_BXCR_BW_32BIT
+
+#define EBC_BXCR_LARGE_FLASH_CS2        EBC_BXCR_BAS_ENCODE(0xE7000000) | \
+                                        EBC_BXCR_BS_16MB                | \
+                                        EBC_BXCR_BU_RW                  | \
+                                        EBC_BXCR_BW_16BIT
+
+#define EBC_BXCR_FPGA_CS3               EBC_BXCR_BAS_ENCODE(0xe2000000) | \
+                                        EBC_BXCR_BS_1MB                 | \
+                                        EBC_BXCR_BU_RW                  | \
+                                        EBC_BXCR_BW_16BIT
+
+/*****************************************************************************
+ * UBOOT initiated board specific function calls
+ ****************************************************************************/
+
+int board_early_init_f(void)
+{
+	int computed_boot_device = BOOT_DEVICE_UNKNOWN;
+
+	/*
+	 * Initialise EBC
+	 */
+	early_init_EBC();
+
+	/*
+	 * Determine which boot device was selected
+	 */
+	computed_boot_device = bootdevice_selected();
+
+	/*
+	 * Reinit EBC based on selected boot device
+	 */
+	early_reinit_EBC(computed_boot_device);
+
+	/*
+	 * Setup for UIC on 460SX redwood board
+	 */
+	early_init_UIC();
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	char *s = getenv("serial#");
+
+	printf("Board: Redwood - AMCC 460SX Reference Board");
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return 0;
+}
+
+static void early_init_EBC(void)
+{
+	/*-------------------------------------------------------------------+
+	| Initialize EBC CONFIG -
+	| Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
+	| default value :
+	|      0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
+	|
+	+-------------------------------------------------------------------*/
+	mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
+	      EBC_CFG_PTD_ENABLE |
+	      EBC_CFG_RTC_16PERCLK |
+	      EBC_CFG_ATC_PREVIOUS |
+	      EBC_CFG_DTC_PREVIOUS |
+	      EBC_CFG_CTC_PREVIOUS |
+	      EBC_CFG_OEO_PREVIOUS |
+	      EBC_CFG_EMC_DEFAULT | EBC_CFG_PME_DISABLE | EBC_CFG_PR_16);
+
+	/*-------------------------------------------------------------------+
+         |
+         |  PART 1 : Initialize EBC Bank 3
+         |  ==============================
+         | Bank1 is always associated to the EPLD.
+         | It has to be initialized prior to other banks settings computation
+         | since some board registers values may be needed to determine the
+         | boot type
+         |
+         +-------------------------------------------------------------------*/
+	mtebc(pb1ap, EBC_BXAP_FPGA);
+	mtebc(pb1cr, EBC_BXCR_FPGA_CS3);
+
+}
+
+static int bootdevice_selected(void)
+{
+	unsigned long sdr0_pinstp;
+	unsigned long bootstrap_settings;
+	int computed_boot_device = BOOT_DEVICE_UNKNOWN;
+
+	/*-------------------------------------------------------------------+
+         |
+         |  Determine which boot device was selected
+         |  =================================================
+         |
+         |  Read Pin Strap Register in PPC460SX
+         |  Result can either be :
+         |   - Boot strap = boot from EBC 8bits     => Small Flash
+         |   - Boot strap = boot from PCI
+         |   - Boot strap = IIC
+         |  In case of boot from IIC, read Serial Device Strap Register1
+         |
+         |  Result can either be :
+         |   - Boot from EBC  - EBC Bus Width = 8bits    => Small Flash
+         |   - Boot from EBC  - EBC Bus Width = 16bits   => Large Flash or SRAM
+         |   - Boot from PCI
+         |
+         +-------------------------------------------------------------------*/
+	/* Read Pin Strap Register in PPC460SX */
+	mfsdr(SDR0_PINSTP, sdr0_pinstp);
+	bootstrap_settings = sdr0_pinstp & SDR0_PSTRP0_BOOTSTRAP_MASK;
+
+	switch (bootstrap_settings) {
+	case SDR0_PSTRP0_BOOTSTRAP_SETTINGS0:
+		/*
+		 * Boot from SRAM, 8bit width
+		 */
+		computed_boot_device = BOOT_FROM_8BIT_SRAM;
+		break;
+	case SDR0_PSTRP0_BOOTSTRAP_SETTINGS1:
+		/*
+		 * Boot from SRAM, 32bit width
+		 */
+		computed_boot_device = BOOT_FROM_32BIT_SRAM;
+		break;
+	case SDR0_PSTRP0_BOOTSTRAP_SETTINGS2:
+		/*
+		 * Boot from NAND, 8bit width
+		 */
+		computed_boot_device = BOOT_FROM_8BIT_NAND;
+		break;
+	case SDR0_PSTRP0_BOOTSTRAP_SETTINGS4:
+		/*
+		 * Boot from SRAM, 16bit width
+		 * Boot setting in IIC EEPROM 0x50
+		 */
+		computed_boot_device = BOOT_FROM_16BIT_SRAM;
+		break;
+	case SDR0_PSTRP0_BOOTSTRAP_SETTINGS5:
+		/*
+		 * Boot from NOR, 16bit width
+		 * Boot setting in IIC EEPROM 0x54
+		 */
+		computed_boot_device = BOOT_FROM_16BIT_NOR;
+		break;
+	default:
+		/* should not be */
+		computed_boot_device = BOOT_DEVICE_UNKNOWN;
+		break;
+	}
+
+	return computed_boot_device;
+}
+
+static void early_reinit_EBC(int computed_boot_device)
+{
+	/*-------------------------------------------------------------------+
+         |
+         |  Compute EBC settings depending on selected boot device
+         |  ======   ======================================================
+         |
+         | Resulting EBC init will be among following configurations :
+         |
+         |  - Boot from EBC 8bits => boot from Small Flash selected
+         |            EBC-CS0     = Small Flash
+         |            EBC-CS2     = Large Flash and SRAM
+         |
+         |  - Boot from EBC 16bits => boot from Large Flash or SRAM
+         |            EBC-CS0     = Large Flash or SRAM
+         |            EBC-CS2     = Small Flash
+         |
+         |  - Boot from PCI
+         |            EBC-CS0     = not initialized to avoid address contention
+         |            EBC-CS2     = same as boot from Small Flash selected
+         |
+         +-------------------------------------------------------------------*/
+	unsigned long ebc0_cs0_bxap_value = 0, ebc0_cs0_bxcr_value = 0;
+	unsigned long ebc0_cs1_bxap_value = 0, ebc0_cs1_bxcr_value = 0;
+	unsigned long ebc0_cs2_bxap_value = 0, ebc0_cs2_bxcr_value = 0;
+
+	switch (computed_boot_device) {
+		/*-------------------------------------------------------------------*/
+	case BOOT_FROM_8BIT_SRAM:
+		/*-------------------------------------------------------------------*/
+		ebc0_cs0_bxap_value = EBC_BXAP_8BIT_SRAM;
+		ebc0_cs0_bxcr_value = EBC_BXCR_8BIT_SRAM_CS0;
+		ebc0_cs1_bxap_value = EBC_BXAP_NOR;
+		ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
+		ebc0_cs2_bxap_value = EBC_BXAP_NAND;
+		ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2;
+		break;
+
+		/*-------------------------------------------------------------------*/
+	case BOOT_FROM_16BIT_SRAM:
+		/*-------------------------------------------------------------------*/
+		ebc0_cs0_bxap_value = EBC_BXAP_16BIT_SRAM;
+		ebc0_cs0_bxcr_value = EBC_BXCR_16BIT_SRAM_CS0;
+		ebc0_cs1_bxap_value = EBC_BXAP_NOR;
+		ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
+		ebc0_cs2_bxap_value = EBC_BXAP_NAND;
+		ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2;
+		break;
+
+		/*-------------------------------------------------------------------*/
+	case BOOT_FROM_32BIT_SRAM:
+		/*-------------------------------------------------------------------*/
+		ebc0_cs0_bxap_value = EBC_BXAP_32BIT_SRAM;
+		ebc0_cs0_bxcr_value = EBC_BXCR_32BIT_SRAM_CS0;
+		ebc0_cs1_bxap_value = EBC_BXAP_NOR;
+		ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
+		ebc0_cs2_bxap_value = EBC_BXAP_NAND;
+		ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2;
+		break;
+
+		/*-------------------------------------------------------------------*/
+	case BOOT_FROM_16BIT_NOR:
+		/*-------------------------------------------------------------------*/
+		ebc0_cs0_bxap_value = EBC_BXAP_NOR;
+		ebc0_cs0_bxcr_value = EBC_BXCR_NOR_CS0;
+		ebc0_cs1_bxap_value = EBC_BXAP_NAND;
+		ebc0_cs1_bxcr_value = EBC_BXCR_NAND_CS1;
+		ebc0_cs2_bxap_value = EBC_BXAP_32BIT_SRAM;
+		ebc0_cs2_bxcr_value = EBC_BXCR_SRAM_CS2;
+		break;
+
+		/*-------------------------------------------------------------------*/
+	case BOOT_FROM_8BIT_NAND:
+		/*-------------------------------------------------------------------*/
+		ebc0_cs0_bxap_value = EBC_BXAP_NAND;
+		ebc0_cs0_bxcr_value = EBC_BXCR_NAND_CS0;
+		ebc0_cs1_bxap_value = EBC_BXAP_NOR;
+		ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
+		ebc0_cs2_bxap_value = EBC_BXAP_32BIT_SRAM;
+		ebc0_cs2_bxcr_value = EBC_BXCR_SRAM_CS2;
+		break;
+
+		/*-------------------------------------------------------------------*/
+	default:
+		/*-------------------------------------------------------------------*/
+		/* BOOT_DEVICE_UNKNOWN */
+		break;
+	}
+
+	mtebc(pb0ap, ebc0_cs0_bxap_value);
+	mtebc(pb0cr, ebc0_cs0_bxcr_value);
+	mtebc(pb1ap, ebc0_cs1_bxap_value);
+	mtebc(pb1cr, ebc0_cs1_bxcr_value);
+	mtebc(pb2ap, ebc0_cs2_bxap_value);
+	mtebc(pb2cr, ebc0_cs2_bxcr_value);
+}
+
+static void early_init_UIC(void)
+{
+	/*--------------------------------------------------------------------+
+	| Initialise UIC registers.  Clear all interrupts.  Disable all
+	| interrupts.
+	| Set critical interrupt values.  Set interrupt polarities.  Set
+	| interrupt trigger levels.  Make bit 0 High  priority.  Clear all
+	| interrupts again.
+	+-------------------------------------------------------------------*/
+	mtdcr(uic3sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr(uic3er, 0x00000000);	/* disable all interrupts */
+	mtdcr(uic3cr, 0x00000000);	/* Set Critical / Non Critical
+					 * interrupts */
+	mtdcr(uic3pr, 0xffffffff);	/* Set Interrupt Polarities */
+	mtdcr(uic3tr, 0x001fffff);	/* Set Interrupt Trigger Levels */
+	mtdcr(uic3vr, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(uic3sr, 0xffffffff);	/* clear all  interrupts */
+
+	mtdcr(uic2sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr(uic2er, 0x00000000);	/* disable all interrupts */
+	mtdcr(uic2cr, 0x00000000);	/* Set Critical / Non Critical
+					 * interrupts */
+	mtdcr(uic2pr, 0xebebebff);	/* Set Interrupt Polarities */
+	mtdcr(uic2tr, 0x74747400);	/* Set Interrupt Trigger Levels */
+	mtdcr(uic2vr, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(uic2sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr(uic1sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr(uic1er, 0x00000000);	/* disable all interrupts */
+	mtdcr(uic1cr, 0x00000000);	/* Set Critical / Non Critical
+					 * interrupts */
+	mtdcr(uic1pr, 0xffffffff);	/* Set Interrupt Polarities */
+	mtdcr(uic1tr, 0x001fc0ff);	/* Set Interrupt Trigger Levels */
+	mtdcr(uic1vr, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr(uic0sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr(uic0er, 0x00000000);	/* disable all interrupts excepted
+					 * cascade to be checked */
+	mtdcr(uic0cr, 0x00104001);	/* Set Critical / Non Critical
+					 * interrupts */
+	mtdcr(uic0pr, 0xffffffff);	/* Set Interrupt Polarities */
+	mtdcr(uic0tr, 0x000f003c);	/* Set Interrupt Trigger Levels */
+	mtdcr(uic0vr, 0x00000000);	/* int31 highest, base=0x000 */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all interrupts */
+
+}
diff --git a/board/amcc/redwood/redwood.h b/board/amcc/redwood/redwood.h
new file mode 100644
index 0000000..89b87e6
--- /dev/null
+++ b/board/amcc/redwood/redwood.h
@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2008
+ * Feng Kan, Applied Micro Circuit Corp., fkan at amcc.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __REDWOOD_H_
+#define __REDWOOD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*----------------------------------------------------------------------------+
+| Defines
++----------------------------------------------------------------------------*/
+/* Pin Straps Reg */
+#define SDR0_PSTRP0			0x0040
+#define SDR0_PSTRP0_BOOTSTRAP_MASK	0xE0000000	/* Strap Bits */
+
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0	0x00000000	/* Default strap settings 0 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1	0x20000000	/* Default strap settings 1 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2	0x40000000	/* Default strap settings 2 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3	0x60000000	/* Default strap settings 3 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4	0x80000000	/* Default strap settings 4 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5	0xA0000000	/* Default strap settings 5 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6	0xC0000000	/* Default strap settings 6 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7	0xE0000000	/* Default strap settings 7 */
+
+#ifdef __cplusplus
+}
+#endif
+#endif				/* __REDWOOD_H_ */
diff --git a/board/amcc/redwood/u-boot.lds b/board/amcc/redwood/u-boot.lds
new file mode 100644
index 0000000..2104cc2
--- /dev/null
+++ b/board/amcc/redwood/u-boot.lds
@@ -0,0 +1,147 @@
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/ppc4xx/start.o	(.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)		}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o		(.text)
+    board/amcc/redwood/init.o	(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
-- 
1.5.6.1





More information about the U-Boot mailing list