[U-Boot-Users] [PATCH 3/6] sbc8560: define eth0 and eth1 instead of eth1 and eth2

Paul Gortmaker paul.gortmaker at windriver.com
Wed Jul 9 19:27:36 CEST 2008


The existing config doesn't define CONFIG_HAS_ETH0, and so the
fdt support doesn't update the zeros in the dtb local-mac with
real data from the u-boot env.  Since the existing config is
tailored to just two interfaces, get rid of the ETH2 definitions
at the same time.
---
 include/configs/sbc8560.h |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index f07fbc0..e5195e0 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -407,11 +407,10 @@
 
 /*Note: change below for your network setting!!! */
 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+#  define CONFIG_HAS_ETH0
 #  define CONFIG_ETHADDR	00:01:af:07:9b:8a
 #  define CONFIG_HAS_ETH1
 #  define CONFIG_ETH1ADDR	00:01:af:07:9b:8b
-#  define CONFIG_HAS_ETH2
-#  define CONFIG_ETH2ADDR	00:01:af:07:9b:8c
 #endif
 
 #define CONFIG_SERVERIP		192.168.0.131
-- 
1.5.6.6.gd3e97





More information about the U-Boot mailing list