[U-Boot-Users] [PATCH 0/1] Moved initialization of AVR32 Ethernet controllers to board_eth_init()

[Ben Warren]

Hans-Christian Egtvedt wrote:
> On Thu, 2008-07-10 at 14:47 +0200, Hans-Christian Egtvedt wrote:
>   
>> On Thu, 2008-07-10 at 14:45 +0200, Hans-Christian Egtvedt wrote:
>>     
>>> On Thu, 2008-07-10 at 13:24 +0200, Haavard Skinnemoen wrote:
>>>       
>
> <snipp>
>
>   
>>>> Looks good to me, but I don't have the chance to test it.
>>>>
>>>>         
>>> I tried looking into it, but I do not see who is going to call
>>> board_eth_init() ? Is this supposed to be done in net/eth.c or
>>> lib_avr32/board.c ?
>>>
>>>       
>> Cheese, I am blind, just found it almost on top in the eth_initialize()
>> function.
>>
>> I will pull the master and see if it works.
>>
>>     
>
> And it works, proof below (-: (Net: did not work before pulling master)
>
> U-Boot 1.3.3-00248-gae9bc0c-dirty (Jul 10 2008 - 14:50:32) 
>
> U-Boot code: 00000000 -> 0000f6b8  data: 000155c0 -> 0004bd18
> malloc: Using memory from 0x10f74000 to 0x10fb4000
> DMA: Using memory from 0x10f70000 to 0x10f74000
> Flash:  8 MB at address 0x00000000
> DRAM Configuration:
> Bank #0: 10000000 16 MB
> In:    serial
> Out:   serial
> Err:   serial
> Net:   macb0
> Press SPACE to abort autoboot in 1 seconds
> macb0: link up, 100Mbps full-duplex (lpa: 0x45e1)
> BOOTP broadcast 1
> DHCP client bound to address 10.191.252.36
> Using macb0 device
> TFTP from server 10.191.252.83; our IP address is 10.191.252.36
> Filename 'uimage_br_stk'.
> Load address: 0x10400000
> Loading: T #################################################################
>          ###########
> done
> Bytes transferred = 1111788 (10f6ec hex)
> ## Booting kernel from Legacy Image at 10400000 ...
>    Image Name:   Linux-2.6.25.10.atmel.2
>    Image Type:   AVR32 Linux Kernel Image (gzip compressed)
>    Data Size:    1111724 Bytes =  1.1 MB
>    Load Address: 10000000
>    Entry Point:  90000000
>    Verifying Checksum ... OK
>    Uncompressing Kernel Image ... OK
>
> Starting kernel at 90000000 (params at 10f74008)...
>
> Linux version 2.6.25.10.atmel.2 (hcegtvedt at ssg-0) (gcc version 4.2.2-atmel.1.0.8) #68 Thu Jul 10 13:16:42 CEST 2008
>
>   
Good news!

Thanks,
Ben