[U-Boot-Users] [PATCH] I2C Monitor Chip ADT7460 support

[Michal Simek]

Still you have 3 empty lines. Look at code.

!!!! Do not add more than 2 empty lines to source files 

M

From: Ricardo Ribalda Delgado <ricardo at aragorn.ii.uam.es>


Signed-off-by: Ricardo Ribalda Delgado <ricardo at aragorn.ii.uam.es>
---
 drivers/hwmon/Makefile  |    1 +
 drivers/hwmon/adt7460.c |   90 +++++++++++++++++++++++++++++++++++++++++++++++
 include/dtt.h           |    3 +-
 3 files changed, 93 insertions(+), 1 deletions(-)
 create mode 100644 drivers/hwmon/adt7460.c

diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 065433a..e301eaa 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -37,6 +37,7 @@ COBJS-y += ds1775.o
 COBJS-$(CONFIG_DTT_LM73) += lm73.o
 COBJS-y += lm75.o
 COBJS-y += lm81.o
+COBJS-$(CONFIG_DTT_ADT7460) += adt7460.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/hwmon/adt7460.c b/drivers/hwmon/adt7460.c
new file mode 100644
index 0000000..cf54d40
--- /dev/null
+++ b/drivers/hwmon/adt7460.c
@@ -0,0 +1,90 @@
+/*   
+    (C) Copyright 2008
+    Ricado Ribalda-Universidad Autonoma de Madrid, ricardo.ribalda at uam.es
+    This work has been supported by: Q-Technology  http://qtec.com/
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <common.h>
+
+#include <i2c.h>
+#include <dtt.h>
+
+#define ADT7460_ADDRESS 	0x2c
+#define ADT7460_INVALID 	128
+#define ADT7460_CONFIG		0x40
+#define ADT7460_REM1_TEMP	0x25
+#define ADT7460_LOCAL_TEMP	0x26
+#define ADT7460_REM2_TEMP	0x27
+
+int dtt_read(int sensor, int reg)
+{
+	u8 dir=reg;
+	u8 data;
+
+	if ( i2c_read(ADT7460_ADDRESS,dir,1,&data,1) ==-1 )
+		return -1;
+	
+	if (data==ADT7460_INVALID)
+		return -1;
+
+	return data;
+} 
+
+int dtt_write(int sensor, int reg, int val)
+{
+	u8 dir=reg;
+	u8 data=val;
+	
+	if ( i2c_write(ADT7460_ADDRESS,dir,1,&data,1) ==-1 )
+		return -1;
+
+	return 0;
+} 
+
+
+

here!!!!

+int dtt_init (void)
+{
+	printf("ADT7460 at I2C address 0x%2x\n",ADT7460_ADDRESS);
+
+	if ( dtt_write(0,ADT7460_CONFIG,1) ==-1 ){
+		printf("Error initialiting ADT7460\n");
+		return -1;
+	}
+
+	return 0;
+} 
+
+int dtt_get_temp(int sensor)
+{
+	int aux;
+	u8 table[]={ADT7460_REM1_TEMP,ADT7460_LOCAL_TEMP,ADT7460_REM2_TEMP};
+
+	if (sensor>2){
+		printf("DTT sensor does not exist\n");
+		return -1;
+	}
+	
+	aux=dtt_read(0,table[sensor]);
+
+	if (aux==-1){
+		printf("DTT temperature read failed\n");
+		return -1;
+
+	}
+	return aux;
+}
+
diff --git a/include/dtt.h b/include/dtt.h
index 4e8aaad..db448ce 100644
--- a/include/dtt.h
+++ b/include/dtt.h
@@ -32,7 +32,8 @@
     defined(CONFIG_DTT_DS1775) || \
     defined(CONFIG_DTT_LM81) || \
     defined(CONFIG_DTT_ADM1021) || \
-    defined(CONFIG_DTT_LM73)
+    defined(CONFIG_DTT_LM73)|| \
+    defined(CONFIG_DTT_ADT7460)
 
 #define CONFIG_DTT				/* We have a DTT */
 
-- 
1.5.6.2


-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users