[U-Boot-Users] [PATCH 3/4] ARM DaVinci: Move common functions to board/davinci/common
Hugo Villeneuve
hugo.villeneuve at lyrtech.com
Fri Jul 11 21:10:13 CEST 2008
ARM DaVinci: Move common functions to board/davinci/common.
Signed-off-by: Hugo Villeneuve <hugo.villeneuve at lyrtech.com>
---
board/davinci/common/Makefile | 53 ++++++++++++
board/davinci/common/misc.c | 126 ++++++++++++++++++++++++++++
board/davinci/common/misc.h | 32 +++++++
board/davinci/common/psc.c | 117 ++++++++++++++++++++++++++
board/davinci/common/psc.h | 28 +++++++
board/davinci/dv-evm/dv_board.c | 129 ++++--------------------------
board/davinci/schmoogie/dv_board.c | 103 ++---------------------
board/davinci/sffsdr/sffsdr.c | 158 ++++--------------------------------
board/davinci/sonata/dv_board.c | 122 +++-------------------------
9 files changed, 404 insertions(+), 464 deletions(-)
diff --git a/board/davinci/common/Makefile b/board/davinci/common/Makefile
new file mode 100644
index 0000000..127bb6e
--- /dev/null
+++ b/board/davinci/common/Makefile
@@ -0,0 +1,53 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)board/$(VENDOR)/common)
+endif
+
+LIB = $(obj)lib$(VENDOR).a
+
+COBJS := psc.o misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c
new file mode 100644
index 0000000..71a3b87
--- /dev/null
+++ b/board/davinci/common/misc.c
@@ -0,0 +1,126 @@
+/*
+ * Miscelaneous DaVinci functions.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi at koi8.net>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/hardware.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return(0);
+}
+
+static int dv_get_pllm_output(uint32_t pllm)
+{
+ return (pllm + 1) * (CFG_HZ_CLOCK / 1000000);
+}
+
+void dv_display_clk_infos(void)
+{
+ printf("ARM Clock: %dMHz\n", dv_get_pllm_output(REG(PLL1_PLLM)) / 2);
+ printf("DDR Clock: %dMHz\n", dv_get_pllm_output(REG(PLL2_PLLM)) /
+ ((REG(PLL2_DIV2) & 0x1f) + 1) / 2);
+}
+
+/* Read ethernet MAC address from EEPROM for DVEVM compatible boards.
+ * Returns 1 if found, 0 otherwise.
+ */
+int dvevm_read_mac_address(uint8_t *buf)
+{
+#ifdef CFG_I2C_EEPROM_ADDR
+ /* Read MAC address. */
+ if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7F00, CFG_I2C_EEPROM_ADDR_LEN,
+ (uint8_t *) &buf[0], 6))
+ goto i2cerr;
+
+ /* Check that MAC address is not null. */
+ if (memcmp(buf, "\0\0\0\0\0\0", 6) == 0)
+ goto err;
+
+ return 1; /* Found */
+
+i2cerr:
+ printf("Read from EEPROM @ 0x%02x failed\n", CFG_I2C_EEPROM_ADDR);
+err:
+#endif /* CFG_I2C_EEPROM_ADDR */
+
+ return 0;
+}
+
+/* If there is a MAC address in the environment, and if it is not identical to
+ * the MAC address in the ROM, then a warning is printed and the MAC address
+ * from the environment is used.
+ *
+ * If there is no MAC address in the environment, then it will be initialized
+ * (silently) from the value in the ROM.
+ */
+void dv_configure_mac_address(uint8_t *rom_enetaddr)
+{
+ int i;
+ u_int8_t env_enetaddr[6];
+ char *tmp = getenv("ethaddr");
+ char *end;
+
+ /* Read Ethernet MAC address from the U-Boot environment.
+ * If it is not defined, env_enetaddr[] will be cleared. */
+ for (i = 0; i < 6; i++) {
+ env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
+ if (tmp)
+ tmp = (*end) ? end+1 : end;
+ }
+
+ /* Check if ROM and U-Boot environment MAC addresses match. */
+ if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 &&
+ memcmp(env_enetaddr, rom_enetaddr, 6) != 0) {
+ printf("Warning: MAC addresses don't match:\n");
+ printf(" ROM MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ rom_enetaddr[0], rom_enetaddr[1],
+ rom_enetaddr[2], rom_enetaddr[3],
+ rom_enetaddr[4], rom_enetaddr[5]);
+ printf(" \"ethaddr\" value: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ env_enetaddr[0], env_enetaddr[1],
+ env_enetaddr[2], env_enetaddr[3],
+ env_enetaddr[4], env_enetaddr[5]) ;
+ debug("### Using MAC address from environment\n");
+ }
+ if (!tmp) {
+ char ethaddr[20];
+
+ /* There is no MAC address in the environment, so we initialize
+ * it from the value in the ROM. */
+ sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
+ rom_enetaddr[0], rom_enetaddr[1],
+ rom_enetaddr[2], rom_enetaddr[3],
+ rom_enetaddr[4], rom_enetaddr[5]) ;
+ debug("### Setting environment from ROM MAC address = \"%s\"\n",
+ ethaddr);
+ setenv("ethaddr", ethaddr);
+ }
+}
diff --git a/board/davinci/common/misc.h b/board/davinci/common/misc.h
new file mode 100644
index 0000000..4a57dbb
--- /dev/null
+++ b/board/davinci/common/misc.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MISC_H
+#define __MISC_H
+
+extern void timer_init(void);
+extern int eth_hw_init(void);
+
+void dv_display_clk_infos(void);
+int dvevm_read_mac_address(uint8_t *buf);
+void dv_configure_mac_address(uint8_t *rom_enetaddr);
+
+#endif /* __MISC_H */
diff --git a/board/davinci/common/psc.c b/board/davinci/common/psc.c
new file mode 100644
index 0000000..00dc07c
--- /dev/null
+++ b/board/davinci/common/psc.c
@@ -0,0 +1,117 @@
+/*
+ * Power and Sleep Controller (PSC) functions.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi at koi8.net>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+
+/*
+ * The DM6446 includes two separate power domains: "Always On" and "DSP". The
+ * "Always On" power domain is always on when the chip is on. The "Always On"
+ * domain is powered by the VDD pins of the DM6446. The majority of the
+ * DM6446's modules lie within the "Always On" power domain. A separate
+ * domain called the "DSP" domain houses the C64x+ and VICP. The "DSP" domain
+ * is not always on. The "DSP" power domain is powered by the CVDDDSP pins of
+ * the DM6446.
+ */
+
+/* Works on Always On power domain only (no PD argument) */
+void lpsc_on(unsigned int id)
+{
+ dv_reg_p mdstat, mdctl;
+
+ if (id >= DAVINCI_LPSC_GEM)
+ return; /* Don't work on DSP Power Domain */
+
+ mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
+ mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
+
+ while (REG(PSC_PTSTAT) & 0x01);
+
+ if ((*mdstat & 0x1f) == 0x03)
+ return; /* Already on and enabled */
+
+ *mdctl |= 0x03;
+
+ /* Special treatment for some modules as for sprue14 p.7.4.2 */
+ switch (id) {
+ case DAVINCI_LPSC_VPSSSLV:
+ case DAVINCI_LPSC_EMAC:
+ case DAVINCI_LPSC_EMAC_WRAPPER:
+ case DAVINCI_LPSC_MDIO:
+ case DAVINCI_LPSC_USB:
+ case DAVINCI_LPSC_ATA:
+ case DAVINCI_LPSC_VLYNQ:
+ case DAVINCI_LPSC_UHPI:
+ case DAVINCI_LPSC_DDR_EMIF:
+ case DAVINCI_LPSC_AEMIF:
+ case DAVINCI_LPSC_MMC_SD:
+ case DAVINCI_LPSC_MEMSTICK:
+ case DAVINCI_LPSC_McBSP:
+ case DAVINCI_LPSC_GPIO:
+ *mdctl |= 0x200;
+ break;
+ }
+
+ REG(PSC_PTCMD) = 0x01;
+
+ while (REG(PSC_PTSTAT) & 0x03);
+ while ((*mdstat & 0x1f) != 0x03); /* Probably an overkill... */
+}
+
+/* If DSPLINK is used, we don't want U-Boot to power on the DSP. */
+#if !defined(CFG_USE_DSPLINK)
+void dsp_on(void)
+{
+ int i;
+
+ if (REG(PSC_PDSTAT1) & 0x1f)
+ return; /* Already on */
+
+ REG(PSC_GBLCTL) |= 0x01;
+ REG(PSC_PDCTL1) |= 0x01;
+ REG(PSC_PDCTL1) &= ~0x100;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
+ REG(PSC_PTCMD) = 0x02;
+
+ for (i = 0; i < 100; i++) {
+ if (REG(PSC_EPCPR) & 0x02)
+ break;
+ }
+
+ REG(PSC_CHP_SHRTSW) = 0x01;
+ REG(PSC_PDCTL1) |= 0x100;
+ REG(PSC_EPCCR) = 0x02;
+
+ for (i = 0; i < 100; i++) {
+ if (!(REG(PSC_PTSTAT) & 0x02))
+ break;
+ }
+
+ REG(PSC_GBLCTL) &= ~0x1f;
+}
+#endif /* CFG_USE_DSPLINK */
diff --git a/board/davinci/common/psc.h b/board/davinci/common/psc.h
new file mode 100644
index 0000000..6ab2575
--- /dev/null
+++ b/board/davinci/common/psc.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __PSC_H
+#define __PSC_H
+
+void lpsc_on(unsigned int id);
+void dsp_on(void);
+
+#endif /* __PSC_H */
diff --git a/board/davinci/dv-evm/dv_board.c b/board/davinci/dv-evm/dv_board.c
index 834eb68..151f8a9 100644
--- a/board/davinci/dv-evm/dv_board.c
+++ b/board/davinci/dv-evm/dv_board.c
@@ -28,89 +28,11 @@
#include <i2c.h>
#include <asm/arch/hardware.h>
#include <asm/arch/emac_defs.h>
+#include "../common/psc.h"
+#include "../common/misc.h"
DECLARE_GLOBAL_DATA_PTR;
-extern void timer_init(void);
-extern int eth_hw_init(void);
-
-
-/* Works on Always On power domain only (no PD argument) */
-void lpsc_on(unsigned int id)
-{
- dv_reg_p mdstat, mdctl;
-
- if (id >= DAVINCI_LPSC_GEM)
- return; /* Don't work on DSP Power Domain */
-
- mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
- mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
-
- while (REG(PSC_PTSTAT) & 0x01) {;}
-
- if ((*mdstat & 0x1f) == 0x03)
- return; /* Already on and enabled */
-
- *mdctl |= 0x03;
-
- /* Special treatment for some modules as for sprue14 p.7.4.2 */
- if ( (id == DAVINCI_LPSC_VPSSSLV) ||
- (id == DAVINCI_LPSC_EMAC) ||
- (id == DAVINCI_LPSC_EMAC_WRAPPER) ||
- (id == DAVINCI_LPSC_MDIO) ||
- (id == DAVINCI_LPSC_USB) ||
- (id == DAVINCI_LPSC_ATA) ||
- (id == DAVINCI_LPSC_VLYNQ) ||
- (id == DAVINCI_LPSC_UHPI) ||
- (id == DAVINCI_LPSC_DDR_EMIF) ||
- (id == DAVINCI_LPSC_AEMIF) ||
- (id == DAVINCI_LPSC_MMC_SD) ||
- (id == DAVINCI_LPSC_MEMSTICK) ||
- (id == DAVINCI_LPSC_McBSP) ||
- (id == DAVINCI_LPSC_GPIO)
- )
- *mdctl |= 0x200;
-
- REG(PSC_PTCMD) = 0x01;
-
- while (REG(PSC_PTSTAT) & 0x03) {;}
- while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */
-}
-
-void dsp_on(void)
-{
- int i;
-
- if (REG(PSC_PDSTAT1) & 0x1f)
- return; /* Already on */
-
- REG(PSC_GBLCTL) |= 0x01;
- REG(PSC_PDCTL1) |= 0x01;
- REG(PSC_PDCTL1) &= ~0x100;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
- REG(PSC_PTCMD) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (REG(PSC_EPCPR) & 0x02)
- break;
- }
-
- REG(PSC_CHP_SHRTSW) = 0x01;
- REG(PSC_PDCTL1) |= 0x100;
- REG(PSC_EPCCR) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (!(REG(PSC_PTSTAT) & 0x02))
- break;
- }
-
- REG(PSC_GBLCTL) &= ~0x1f;
-}
-
-
int board_init(void)
{
/* arch number of the board */
@@ -131,8 +53,10 @@ int board_init(void)
lpsc_on(DAVINCI_LPSC_TIMER1);
lpsc_on(DAVINCI_LPSC_GPIO);
+#if !defined(CFG_USE_DSPLINK)
/* Powerup the DSP */
dsp_on();
+#endif /* CFG_USE_DSPLINK */
/* Bringup UART0 out of reset */
REG(UART0_PWREMU_MGMT) = 0x0000e003;
@@ -157,46 +81,23 @@ int board_init(void)
return(0);
}
-int misc_init_r (void)
+int misc_init_r(void)
{
- u_int8_t tmp[20], buf[10];
- int i = 0;
- int clk = 0;
-
- clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
-
- printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2);
- printf ("DDR Clock : %dMHz\n", (clk / 2));
-
- /* Set Ethernet MAC address from EEPROM */
- if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7f00, CFG_I2C_EEPROM_ADDR_LEN, buf, 6)) {
- printf("\nEEPROM @ 0x%02x read FAILED!!!\n", CFG_I2C_EEPROM_ADDR);
- } else {
- tmp[0] = 0xff;
- for (i = 0; i < 6; i++)
- tmp[0] &= buf[i];
-
- if ((tmp[0] != 0xff) && (getenv("ethaddr") == NULL)) {
- sprintf((char *)&tmp[0], "%02x:%02x:%02x:%02x:%02x:%02x",
- buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
- setenv("ethaddr", (char *)&tmp[0]);
- }
- }
+ uint8_t video_mode;
+ uint8_t eeprom_enetaddr[6];
- if (!eth_hw_init())
- printf("ethernet init failed!\n");
+ dv_display_clk_infos();
- i2c_read (0x39, 0x00, 1, (u_int8_t *)&i, 1);
+ /* Read Ethernet MAC address from EEPROM if available. */
+ if (dvevm_read_mac_address(eeprom_enetaddr))
+ dv_configure_mac_address(eeprom_enetaddr);
- setenv ("videostd", ((i & 0x80) ? "pal" : "ntsc"));
+ if (!eth_hw_init())
+ printf("ethernet init failed!\n");
- return(0);
-}
+ i2c_read(0x39, 0x00, 1, &video_mode, 1);
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+ setenv("videostd", ((video_mode & 0x80) ? "pal" : "ntsc"));
return(0);
}
diff --git a/board/davinci/schmoogie/dv_board.c b/board/davinci/schmoogie/dv_board.c
index 3017546..99fd326 100644
--- a/board/davinci/schmoogie/dv_board.c
+++ b/board/davinci/schmoogie/dv_board.c
@@ -28,89 +28,11 @@
#include <i2c.h>
#include <asm/arch/hardware.h>
#include <asm/arch/emac_defs.h>
+#include "../common/psc.h"
+#include "../common/misc.h"
DECLARE_GLOBAL_DATA_PTR;
-extern void timer_init(void);
-extern int eth_hw_init(void);
-
-
-/* Works on Always On power domain only (no PD argument) */
-void lpsc_on(unsigned int id)
-{
- dv_reg_p mdstat, mdctl;
-
- if (id >= DAVINCI_LPSC_GEM)
- return; /* Don't work on DSP Power Domain */
-
- mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
- mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
-
- while (REG(PSC_PTSTAT) & 0x01) {;}
-
- if ((*mdstat & 0x1f) == 0x03)
- return; /* Already on and enabled */
-
- *mdctl |= 0x03;
-
- /* Special treatment for some modules as for sprue14 p.7.4.2 */
- if ( (id == DAVINCI_LPSC_VPSSSLV) ||
- (id == DAVINCI_LPSC_EMAC) ||
- (id == DAVINCI_LPSC_EMAC_WRAPPER) ||
- (id == DAVINCI_LPSC_MDIO) ||
- (id == DAVINCI_LPSC_USB) ||
- (id == DAVINCI_LPSC_ATA) ||
- (id == DAVINCI_LPSC_VLYNQ) ||
- (id == DAVINCI_LPSC_UHPI) ||
- (id == DAVINCI_LPSC_DDR_EMIF) ||
- (id == DAVINCI_LPSC_AEMIF) ||
- (id == DAVINCI_LPSC_MMC_SD) ||
- (id == DAVINCI_LPSC_MEMSTICK) ||
- (id == DAVINCI_LPSC_McBSP) ||
- (id == DAVINCI_LPSC_GPIO)
- )
- *mdctl |= 0x200;
-
- REG(PSC_PTCMD) = 0x01;
-
- while (REG(PSC_PTSTAT) & 0x03) {;}
- while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */
-}
-
-void dsp_on(void)
-{
- int i;
-
- if (REG(PSC_PDSTAT1) & 0x1f)
- return; /* Already on */
-
- REG(PSC_GBLCTL) |= 0x01;
- REG(PSC_PDCTL1) |= 0x01;
- REG(PSC_PDCTL1) &= ~0x100;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
- REG(PSC_PTCMD) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (REG(PSC_EPCPR) & 0x02)
- break;
- }
-
- REG(PSC_CHP_SHRTSW) = 0x01;
- REG(PSC_PDCTL1) |= 0x100;
- REG(PSC_EPCCR) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (!(REG(PSC_PTSTAT) & 0x02))
- break;
- }
-
- REG(PSC_GBLCTL) &= ~0x1f;
-}
-
-
int board_init(void)
{
/* arch number of the board */
@@ -131,8 +53,10 @@ int board_init(void)
lpsc_on(DAVINCI_LPSC_TIMER1);
lpsc_on(DAVINCI_LPSC_GPIO);
+#if !defined(CFG_USE_DSPLINK)
/* Powerup the DSP */
dsp_on();
+#endif /* CFG_USE_DSPLINK */
/* Bringup UART0 out of reset */
REG(UART0_PWREMU_MGMT) = 0x0000e003;
@@ -157,11 +81,10 @@ int board_init(void)
return(0);
}
-int misc_init_r (void)
+int misc_init_r(void)
{
u_int8_t tmp[20], buf[10];
int i = 0;
- int clk = 0;
/* Set serial number from UID chip */
u_int8_t crc_tbl[256] = {
@@ -199,17 +122,15 @@ int misc_init_r (void)
0xb6, 0xe8, 0x0a, 0x54, 0xd7, 0x89, 0x6b, 0x35
};
- clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
-
- printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2);
- printf ("DDR Clock : %dMHz\n", (clk / 2));
+ dv_display_clk_infos();
/* Set serial number from UID chip */
if (i2c_read(CFG_UID_ADDR, 0, 1, buf, 8)) {
printf("\nUID @ 0x%02x read FAILED!!!\n", CFG_UID_ADDR);
forceenv("serial#", "FAILED");
} else {
- if (buf[0] != 0x70) { /* Device Family Code */
+ if (buf[0] != 0x70) {
+ /* Device Family Code */
printf("\nUID @ 0x%02x read FAILED!!!\n", CFG_UID_ADDR);
forceenv("serial#", "FAILED");
}
@@ -234,11 +155,3 @@ int misc_init_r (void)
return(0);
}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return(0);
-}
diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c
index f41081f..f47ba0f 100644
--- a/board/davinci/sffsdr/sffsdr.c
+++ b/board/davinci/sffsdr/sffsdr.c
@@ -31,6 +31,8 @@
#include <i2c.h>
#include <asm/arch/hardware.h>
#include <asm/arch/emac_defs.h>
+#include "../common/psc.h"
+#include "../common/misc.h"
#define DAVINCI_A3CR (0x01E00014) /* EMIF-A CS3 config register. */
#define DAVINCI_A3CR_VAL (0x3FFFFFFD) /* EMIF-A CS3 value for FPGA. */
@@ -41,89 +43,6 @@
DECLARE_GLOBAL_DATA_PTR;
-extern void timer_init(void);
-extern int eth_hw_init(void);
-
-
-/* Works on Always On power domain only (no PD argument) */
-void lpsc_on(unsigned int id)
-{
- dv_reg_p mdstat, mdctl;
-
- if (id >= DAVINCI_LPSC_GEM)
- return; /* Don't work on DSP Power Domain */
-
- mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
- mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
-
- while (REG(PSC_PTSTAT) & 0x01);
-
- if ((*mdstat & 0x1f) == 0x03)
- return; /* Already on and enabled */
-
- *mdctl |= 0x03;
-
- /* Special treatment for some modules as for sprue14 p.7.4.2 */
- switch (id) {
- case DAVINCI_LPSC_VPSSSLV:
- case DAVINCI_LPSC_EMAC:
- case DAVINCI_LPSC_EMAC_WRAPPER:
- case DAVINCI_LPSC_MDIO:
- case DAVINCI_LPSC_USB:
- case DAVINCI_LPSC_ATA:
- case DAVINCI_LPSC_VLYNQ:
- case DAVINCI_LPSC_UHPI:
- case DAVINCI_LPSC_DDR_EMIF:
- case DAVINCI_LPSC_AEMIF:
- case DAVINCI_LPSC_MMC_SD:
- case DAVINCI_LPSC_MEMSTICK:
- case DAVINCI_LPSC_McBSP:
- case DAVINCI_LPSC_GPIO:
- *mdctl |= 0x200;
- break;
- }
-
- REG(PSC_PTCMD) = 0x01;
-
- while (REG(PSC_PTSTAT) & 0x03);
- while ((*mdstat & 0x1f) != 0x03); /* Probably an overkill... */
-}
-
-#if !defined(CFG_USE_DSPLINK)
-void dsp_on(void)
-{
- int i;
-
- if (REG(PSC_PDSTAT1) & 0x1f)
- return; /* Already on */
-
- REG(PSC_GBLCTL) |= 0x01;
- REG(PSC_PDCTL1) |= 0x01;
- REG(PSC_PDCTL1) &= ~0x100;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
- REG(PSC_PTCMD) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (REG(PSC_EPCPR) & 0x02)
- break;
- }
-
- REG(PSC_CHP_SHRTSW) = 0x01;
- REG(PSC_PDCTL1) |= 0x100;
- REG(PSC_EPCCR) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (!(REG(PSC_PTSTAT) & 0x02))
- break;
- }
-
- REG(PSC_GBLCTL) &= ~0x1f;
-}
-#endif /* CFG_USE_DSPLINK */
-
int board_init(void)
{
/* arch number of the board */
@@ -172,8 +91,10 @@ int board_init(void)
return(0);
}
-/* Read ethernet MAC address from Integrity data structure inside EEPROM. */
-int read_mac_address(uint8_t *buf)
+/* Read ethernet MAC address from Integrity data structure inside EEPROM.
+ * Returns 1 if found, 0 otherwise.
+ */
+static int sffsdr_read_mac_address(uint8_t *buf)
{
u_int32_t value, mac[2], address;
@@ -182,7 +103,7 @@ int read_mac_address(uint8_t *buf)
CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
goto err;
if (value != INTEGRITY_CHECKWORD_VALUE)
- return 1;
+ return 0;
/* Read SYSCFG structure offset. */
if (i2c_read(CFG_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET,
@@ -216,30 +137,23 @@ int read_mac_address(uint8_t *buf)
buf[4] = mac[1] >> 24;
buf[5] = mac[1] >> 16;
- return 0;
+ return 1; /* Found */
err:
printf("Read from EEPROM @ 0x%02x failed\n", CFG_I2C_EEPROM_ADDR);
- return 1;
+ return 0;
}
/* Platform dependent initialisation. */
int misc_init_r(void)
{
- int i;
- u_int8_t i2cbuf;
- u_int8_t env_enetaddr[6], eeprom_enetaddr[6];
- char *tmp = getenv("ethaddr");
- char *end;
- int clk;
+ uint8_t i2cbuf;
+ uint8_t eeprom_enetaddr[6];
/* EMIF-A CS3 configuration for FPGA. */
REG(DAVINCI_A3CR) = DAVINCI_A3CR_VAL;
- clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
-
- printf("ARM Clock: %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27) / 2);
- printf("DDR Clock: %dMHz\n", (clk / 2));
+ dv_display_clk_infos();
/* Configure I2C switch (PCA9543) to enable channel 0. */
i2cbuf = CFG_I2C_PCA9543_ENABLE_CH0;
@@ -249,43 +163,9 @@ int misc_init_r(void)
return 1;
}
- /* Read Ethernet MAC address from the U-Boot environment. */
- for (i = 0; i < 6; i++) {
- env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
- if (tmp)
- tmp = (*end) ? end+1 : end;
- }
-
- /* Read Ethernet MAC address from EEPROM. */
- if (read_mac_address(eeprom_enetaddr) == 0) {
- if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 &&
- memcmp(env_enetaddr, eeprom_enetaddr, 6) != 0) {
- printf("\nWarning: MAC addresses don't match:\n");
- printf("\tHW MAC address: "
- "%02X:%02X:%02X:%02X:%02X:%02X\n",
- eeprom_enetaddr[0], eeprom_enetaddr[1],
- eeprom_enetaddr[2], eeprom_enetaddr[3],
- eeprom_enetaddr[4], eeprom_enetaddr[5]);
- printf("\t\"ethaddr\" value: "
- "%02X:%02X:%02X:%02X:%02X:%02X\n",
- env_enetaddr[0], env_enetaddr[1],
- env_enetaddr[2], env_enetaddr[3],
- env_enetaddr[4], env_enetaddr[5]) ;
- debug("### Set MAC addr from environment\n");
- memcpy(eeprom_enetaddr, env_enetaddr, 6);
- }
- if (!tmp) {
- char ethaddr[20];
-
- sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
- eeprom_enetaddr[0], eeprom_enetaddr[1],
- eeprom_enetaddr[2], eeprom_enetaddr[3],
- eeprom_enetaddr[4], eeprom_enetaddr[5]) ;
- debug("### Set environment from HW MAC addr = \"%s\"\n",
- ethaddr);
- setenv("ethaddr", ethaddr);
- }
- }
+ /* Read Ethernet MAC address from EEPROM if available. */
+ if (sffsdr_read_mac_address(eeprom_enetaddr))
+ dv_configure_mac_address(eeprom_enetaddr);
if (!eth_hw_init())
printf("Ethernet init failed\n");
@@ -296,11 +176,3 @@ int misc_init_r(void)
return(0);
}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return(0);
-}
diff --git a/board/davinci/sonata/dv_board.c b/board/davinci/sonata/dv_board.c
index a6f9bc7..a6fe825 100644
--- a/board/davinci/sonata/dv_board.c
+++ b/board/davinci/sonata/dv_board.c
@@ -25,92 +25,13 @@
*/
#include <common.h>
-#include <i2c.h>
#include <asm/arch/hardware.h>
#include <asm/arch/emac_defs.h>
+#include "../common/psc.h"
+#include "../common/misc.h"
DECLARE_GLOBAL_DATA_PTR;
-extern void timer_init(void);
-extern int eth_hw_init(void);
-
-
-/* Works on Always On power domain only (no PD argument) */
-void lpsc_on(unsigned int id)
-{
- dv_reg_p mdstat, mdctl;
-
- if (id >= DAVINCI_LPSC_GEM)
- return; /* Don't work on DSP Power Domain */
-
- mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
- mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
-
- while (REG(PSC_PTSTAT) & 0x01) {;}
-
- if ((*mdstat & 0x1f) == 0x03)
- return; /* Already on and enabled */
-
- *mdctl |= 0x03;
-
- /* Special treatment for some modules as for sprue14 p.7.4.2 */
- if ( (id == DAVINCI_LPSC_VPSSSLV) ||
- (id == DAVINCI_LPSC_EMAC) ||
- (id == DAVINCI_LPSC_EMAC_WRAPPER) ||
- (id == DAVINCI_LPSC_MDIO) ||
- (id == DAVINCI_LPSC_USB) ||
- (id == DAVINCI_LPSC_ATA) ||
- (id == DAVINCI_LPSC_VLYNQ) ||
- (id == DAVINCI_LPSC_UHPI) ||
- (id == DAVINCI_LPSC_DDR_EMIF) ||
- (id == DAVINCI_LPSC_AEMIF) ||
- (id == DAVINCI_LPSC_MMC_SD) ||
- (id == DAVINCI_LPSC_MEMSTICK) ||
- (id == DAVINCI_LPSC_McBSP) ||
- (id == DAVINCI_LPSC_GPIO)
- )
- *mdctl |= 0x200;
-
- REG(PSC_PTCMD) = 0x01;
-
- while (REG(PSC_PTSTAT) & 0x03) {;}
- while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */
-}
-
-void dsp_on(void)
-{
- int i;
-
- if (REG(PSC_PDSTAT1) & 0x1f)
- return; /* Already on */
-
- REG(PSC_GBLCTL) |= 0x01;
- REG(PSC_PDCTL1) |= 0x01;
- REG(PSC_PDCTL1) &= ~0x100;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
- REG(PSC_PTCMD) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (REG(PSC_EPCPR) & 0x02)
- break;
- }
-
- REG(PSC_CHP_SHRTSW) = 0x01;
- REG(PSC_PDCTL1) |= 0x100;
- REG(PSC_EPCCR) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (!(REG(PSC_PTSTAT) & 0x02))
- break;
- }
-
- REG(PSC_GBLCTL) &= ~0x1f;
-}
-
-
int board_init(void)
{
/* arch number of the board */
@@ -131,8 +52,10 @@ int board_init(void)
lpsc_on(DAVINCI_LPSC_TIMER1);
lpsc_on(DAVINCI_LPSC_GPIO);
+#if !defined(CFG_USE_DSPLINK)
/* Powerup the DSP */
dsp_on();
+#endif /* CFG_USE_DSPLINK */
/* Bringup UART0 out of reset */
REG(UART0_PWREMU_MGMT) = 0x0000e003;
@@ -157,43 +80,18 @@ int board_init(void)
return(0);
}
-int misc_init_r (void)
+int misc_init_r(void)
{
- u_int8_t tmp[20], buf[10];
- int i = 0;
- int clk = 0;
+ uint8_t eeprom_enetaddr[6];
+ dv_display_clk_infos();
- clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
-
- printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2);
- printf ("DDR Clock : %dMHz\n", (clk / 2));
-
- /* Set Ethernet MAC address from EEPROM */
- if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7f00, CFG_I2C_EEPROM_ADDR_LEN, buf, 6)) {
- printf("\nEEPROM @ 0x%02x read FAILED!!!\n", CFG_I2C_EEPROM_ADDR);
- } else {
- tmp[0] = 0xff;
- for (i = 0; i < 6; i++)
- tmp[0] &= buf[i];
-
- if ((tmp[0] != 0xff) && (getenv("ethaddr") == NULL)) {
- sprintf((char *)&tmp[0], "%02x:%02x:%02x:%02x:%02x:%02x",
- buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
- setenv("ethaddr", (char *)&tmp[0]);
- }
- }
+ /* Read Ethernet MAC address from EEPROM if available. */
+ if (dvevm_read_mac_address(eeprom_enetaddr))
+ dv_configure_mac_address(eeprom_enetaddr);
if (!eth_hw_init())
printf("ethernet init failed!\n");
return(0);
}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return(0);
-}
More information about the U-Boot
mailing list