[U-Boot-Users] [PATCH 3/7] sbc8560: define eth0 and eth1 instead of eth1 and eth2

[Paul Gortmaker]

The existing config doesn't define CONFIG_HAS_ETH0, and so the
fdt support doesn't update the zeros in the dtb local-mac with
real data from the u-boot env.  Since the existing config is
tailored to just two interfaces, get rid of the ETH2 definitions
at the same time.

Also don't include any end user specific data into the environment
by default -- things like MAC address, network parameters etc. need
to come from the end user.

Signed-off-by: Paul Gortmaker <paul.gortmaker at windriver.com>
---
 include/configs/sbc8560.h |   22 +++++++++++++---------
 1 files changed, 13 insertions(+), 9 deletions(-)

diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index f07fbc0..f4408ad 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -327,9 +327,8 @@
   #define CFG_ENV_SIZE		0x2000
 #endif
 
-#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600"
+#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600"
 /*#define CONFIG_BOOTARGS      "root=/dev/ram rw console=ttyS0,115200"*/
-#define CONFIG_BOOTCOMMAND	"bootm 0xff800000 0xffa00000"
 #define CONFIG_BOOTDELAY	5	/* -1 disable autoboot */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
@@ -405,19 +404,24 @@
   #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
-/*Note: change below for your network setting!!! */
 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-#  define CONFIG_ETHADDR	00:01:af:07:9b:8a
-#  define CONFIG_HAS_ETH1
-#  define CONFIG_ETH1ADDR	00:01:af:07:9b:8b
-#  define CONFIG_HAS_ETH2
-#  define CONFIG_ETH2ADDR	00:01:af:07:9b:8c
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
 #endif
 
+/* You can compile in a MAC address and your custom net settings by using
+ * the * following syntax.  Your board should be marked with the assigned
+ * MAC addresses directly on it.
+ */
+#if 0
+#define CONFIG_ETHADDR		00:01:af:07:9b:8a
+#define CONFIG_ETH1ADDR		00:01:af:07:9b:8b
 #define CONFIG_SERVERIP		192.168.0.131
 #define CONFIG_IPADDR		192.168.0.105
-#define CONFIG_GATEWAYIP	0.0.0.0
+#define CONFIG_GATEWAYIP	192.168.0.1
 #define CONFIG_NETMASK		255.255.255.0
+#endif
+
 #define CONFIG_HOSTNAME		SBC8560
 #define CONFIG_ROOTPATH		/home/ppc
 #define CONFIG_BOOTFILE		pImage
-- 
1.5.6.2