[U-Boot-Users] PATCH for U-Boot 1.3.3 DHCP fails withnetgearWGR614v6
Wolfgang Denk
wd at denx.de
Sat Jul 12 16:37:51 CEST 2008
In message <200807120112.18889.rgetz at blackfin.uclinux.org> you wrote:
>
> Hmm.. The list was copied every time
But until now none of the messages made it to the list, it seems.
> It looks like my mails take longer to get to sourceforge than it takes to go
> somewhere specific (like Ben), but his responses hit the list before
> mine .... weird - I'll have to check my mail logs...
This message came through without significant delay.
> I have a DHCP server (made by netgear) that does:
>
> U-Boot ---> DHCPDISCOVER ---> Server
> \/
> U-Boot <--- DHCPOFFER <--- Server
> \/
> U-Boot ---> DHCPREQUEST ---> Server
> |
> U-Boot <--- ARP <--- Server
> |
> U-Boot ---> I'm here ---> Server
> |
> U-Boot <--- DHCPNAK <--- Server
> \/
> U-Boot not configured
>
> Before U-Boot receives a DHCPACK packet, it starts using the IP number in the
> DHCPOFFER to respond to the ARP. It should not respond to the ARP, since it
> has not received the DHCPACK packet yet. It also uses it when it sends the
> DHCPREQUEST packet.
>
> I looked a few other dhcp clients, and they always leave the source IP as
> 0.0.0.0 for the DHCPREQUEST packet, and do not listen/send that IP until they
> receive a DHCPACK.
>
> This is what the patch I sent to Ben does - don't set the network up during
> the DHCPREQUEST phase.
>
> --- net/bootp.c.new 2008-07-11 12:05:18.000000000 -0400
> +++ ./net/bootp.c 2008-07-11 18:58:15.000000000 -0400
> @@ -924,8 +924,6 @@
> if (NetReadLong((ulong*)&bp->bp_vend[0]) == htonl(BOOTP_VENDOR_MAGIC))
> DhcpOptionsProcess((u8 *)&bp->bp_vend[4], bp);
>
> - BootpCopyNetParams(bp); /* Store net params from reply */
> -
> NetSetTimeout(TIMEOUT * CFG_HZ, BootpTimeout);
> DhcpSendRequestPkt(bp);
> #ifdef CFG_BOOTFILE_PREFIX
Hm... the line in question is there right from the initial version of
the file, i. e. it is not a spefic fix to any known issue.
So:
Acked-by: Wolfgang Denk <wd at denx.de>
Ben: feel free to add this fix for the current release.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
One possible reason that things aren't going according to plan is
that there never was a plan in the first place.
More information about the U-Boot
mailing list