[U-Boot-Users] [PATCH] Round the serial port clock divisor value returned by calc_divisor()

[Hugo Villeneuve]

Round the serial port clock divisor value returned by
calc_divisor()

Signed-off-by: Hugo Villeneuve <hugo.villeneuve at lyrtech.com>

---

 drivers/serial/serial.c |   12 +++---------
 1 files changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index 4ccaee2..8bbfcf9 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -124,8 +124,6 @@ static NS16550_t serial_ports[4] = {
 
 static int calc_divisor (NS16550_t port)
 {
-	uint32_t clk_divisor;
-
 #ifdef CONFIG_OMAP1510
 	/* If can't cleanly clock 115200 set div to 1 */
 	if ((CFG_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) {
@@ -149,15 +147,11 @@ static int calc_divisor (NS16550_t port)
 
 	/* Compute divisor value. Normally, we should simply return:
 	 *   CFG_NS16550_CLK) / MODE_X_DIV / gd->baudrate
-	 * but we need to round that value by adding 0.5 (2/4).
+	 * but we need to round that value by adding 0.5.
 	 * Rounding is especially important at high baud rates.
 	 */
-	clk_divisor = (((4 * CFG_NS16550_CLK) /
-			(MODE_X_DIV * gd->baudrate)) + 2) / 4;
-
-	debug("NS16550 clock divisor = %d\n", clk_divisor);
-
-	return clk_divisor;
+	return (CFG_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) /
+		(MODE_X_DIV * gd->baudrate);
 }
 
 #if !defined(CONFIG_SERIAL_MULTI)