[U-Boot-Users] Flashing Address of U-Boot

Kapil Kumar Kapil.Kumar at lntinfotech.com
Thu Jul 17 13:11:34 CEST 2008


Hello everybody,

I just started to work on OMAP 3430 it with porting of LINUX 2.6 on a new 
board.

thats how i proceed..

I have dowonload the following for OMAP3430 from this source 
(
http://focus.ti.com/general/docs/wtbu/wtbusplashcontent.tsp?templateId=6123&contentId=4750 
)

2.6_kernel-v1.tar.gz
u-boot-v1.0b.tar.gz
x-load-v1.tar.gz

and compiled using ARM TOOL chain to generate 

x-load.bin
u-boot.bin
vmlinux

Now i have to flash these images into the target.

1.Can any one tell me the exact address location of flash where i should 
flash it.




Thanks a lot
Kapil Kumar

______________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080717/f48d0f6d/attachment.htm 


More information about the U-Boot mailing list