[U-Boot-Users] eth interface (motfec) is not woring with u-boot 1.1.3
vijay vijay
vijays2010 at yahoo.co.in
Fri Jul 18 07:06:59 CEST 2008
Hi,
I am using Denx u-boot 1.1.3 for MPC 870 board.
I ported it for our board with mpc870 processor and I got the u-boot (->) prompt.
UART interface is working finr but Ethernet interface (motfec) is not up yet.
When I try from the u-boot prompt, I am getting following message.
------------------------------------------------------
TX timeout
TX timeout
ping failed; host 10.10.10.4 is not alive
------------------------------------------------------
Following board specific parameters are defined in the /include/configs/tc870.h file
------------------------------------------------------------------------------------------------------------
#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
#define FEC_ENET 1 /* eth.c needs it that way... */
#define CONFIG_FEC_ENET 1
#undef CFG_DISCOVER_PHY
#define CONFIG_MII 1
#define CONFIG_RMII 1 /* use RMII interface */
#define CONFIG_BAUDRATE 9600 /* console baudrate = 115kbps */
#define CONFIG_ETHADDR OO:11:22:33:44:55 /* board MAC addr */
#define CONFIG_IPADDR 10:10:10:2 /* board IP addr */
/*set allowable console baud rates*/
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
#define CONFIG_XIN 10000000
/*#define CONFIG_XIN 50000000*/
/*#define MPC8XX_HZ 66666666*/
#define MPC8XX_HZ 50000000
#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
/*#define CONFIG_8xx_CPUCLK_DEFAULT 50000000*/
#if 0
#define CONFIG_8xx_OSCLK 50000000 /* 50 MHz - PLL input clock */
#define CFG_8xx_CPUCLK_MIN 15000000 /* 50 MHz - CPU minimum clock */
#define CFG_8xx_CPUCLK_MAX 75000000 /* 75 MHz - CPU maximum clock */
#endif
------------------------------------------------------------------------------------------------------------
Any suggestion what is going wrong here
If any thing is missing please let me know
Thanks
Vijay
Unlimited freedom, unlimited storage. Get it now, on http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080718/a1ed70a3/attachment.htm
More information about the U-Boot
mailing list