[U-Boot-Users] [PATCH] Update Freescale 85xx boards to sys_eeprom.c
Timur Tabi
timur at freescale.com
Fri Jul 18 16:52:23 CEST 2008
The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
86xx boards already use sys_eeprom.c, so this patch migrates the remaining
Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
Signed-off-by: Timur Tabi <timur at freescale.com>
---
This patch was tested on an 8548CDS.
board/freescale/common/Makefile | 1 -
board/freescale/common/cds_eeprom.c | 60 -----------------------------------
include/configs/MPC8541CDS.h | 9 ++++-
include/configs/MPC8548CDS.h | 9 ++++-
include/configs/MPC8555CDS.h | 10 +++++-
5 files changed, 22 insertions(+), 67 deletions(-)
delete mode 100644 board/freescale/common/cds_eeprom.c
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 508e3b5..8e23b82 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -30,7 +30,6 @@ endif
LIB = $(obj)lib$(VENDOR).a
COBJS-${CONFIG_FSL_CADMUS} += cadmus.o
-COBJS-${CONFIG_FSL_CDS_EEPROM} += cds_eeprom.o
COBJS-${CONFIG_FSL_VIA} += cds_via.o
COBJS-${CONFIG_FSL_DIU_FB} += fsl_diu_fb.o fsl_logo_bmp.o
COBJS-${CONFIG_FSL_PIXIS} += pixis.o
diff --git a/board/freescale/common/cds_eeprom.c b/board/freescale/common/cds_eeprom.c
deleted file mode 100644
index 5034e0c..0000000
--- a/board/freescale/common/cds_eeprom.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <i2c.h>
-
-#include "eeprom.h"
-
-
-typedef struct {
- char idee_pcbid[4]; /* "CCID" for CDC v1.X */
- u8 idee_major;
- u8 idee_minor;
- char idee_serial[10];
- char idee_errata[2];
- char idee_date[8]; /* yyyymmdd */
- /* The rest of the EEPROM space is reserved */
-} id_eeprom_t;
-
-
-unsigned int
-get_cpu_board_revision(void)
-{
- uint major = 0;
- uint minor = 0;
-
- id_eeprom_t id_eeprom;
-
- i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2,
- (uchar *) &id_eeprom, sizeof(id_eeprom));
-
- major = id_eeprom.idee_major;
- minor = id_eeprom.idee_minor;
-
- if (major == 0xff && minor == 0xff) {
- major = minor = 0;
- }
-
- return MPC85XX_CPU_BOARD_REV(major,minor);
-}
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index a64565d..f991360 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -50,7 +50,6 @@
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
#define CONFIG_FSL_VIA
-#define CONFIG_FSL_CDS_EEPROM
/*
* When initializing flash, if we cannot find the manufacturer ID,
@@ -324,11 +323,17 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR 0x57
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CFG_I2C_EEPROM_CCID
+#define CFG_ID_EEPROM
+#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+
/*
* General PCI
* Memory space is mapped 1-1, but I/O space must start from 0.
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index acf6f0d..b2007b6 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -58,7 +58,6 @@
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
#define CONFIG_FSL_VIA
-#define CONFIG_FSL_CDS_EEPROM
/*
* When initializing flash, if we cannot find the manufacturer ID,
@@ -349,11 +348,17 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR 0x57
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CFG_I2C_EEPROM_CCID
+#define CFG_ID_EEPROM
+#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+
/*
* General PCI
* Memory space is mapped 1-1, but I/O space must start from 0.
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 1948c0d..bb0b3cb 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -50,7 +50,7 @@
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
#define CONFIG_FSL_VIA
-#define CONFIG_FSL_CDS_EEPROM
+
/*
* When initializing flash, if we cannot find the manufacturer ID,
@@ -324,11 +324,17 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR 0x57
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CFG_I2C_EEPROM_CCID
+#define CFG_ID_EEPROM
+#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+
/*
* General PCI
* Addresses are mapped 1-1.
--
1.5.5
More information about the U-Boot
mailing list