[U-Boot-Users] USB Uboot on OSK5912
Markus Klotzbücher
mk at denx.de
Mon Jul 21 12:45:10 CEST 2008
"Shivdas Gujare" <shivdas.gujare at gmail.com> writes:
> I am working on getting USB-uboot working on OSK5912.
> from linux USB gadget "device controller drivers" (i.e.
> kernel/drivers/usb/gadget/) it looks like
> USB core for omap1510 and OSK5912 is same..But not sure, please confirm
No idea. You will have to RTFM.
> I done following steps.
> 1)make mrproper
> 2)make omap5912osk_config
> 3)go to include/configs/omap5912osk.h
> and edit this file with following macros.
> .
> #define CONFIG_DOS_PARTITION 1
>
> #define CONFIG_USB_OHCI 1
Drop this. This would enable the old OHCI support.
> #define CONFIG_USB_OHCI_NEW 1
> #define CFG_USB_OHCI_MAX_ROOT_PORTS 1
> #define CFG_USB_OHCI_SLOT_NAME "osk5912"
> #define CFG_USB_OHCI_REGS_BASE 0xfffba000
> #define CONFIG_USB_STORAGE 1
>
> #define CFG_USB_OHCI_BOARD_INIT 1
> #define CFG_USB_OHCI_CPU_INIT 1
You *might* have to implement these in order to enable power, clocks ...
> #define CONFIG_CMD_USB 1
>
> 4)after this, I am able to see USB command enabled on Uboot console.
> but I am not able to see Mass-storage detected after inserting pendrive
> and doing "usb start"
You probably missed some initialization. Carefully check the
documentation of you CPU and implement it in the functions above.
> 5) from docs/README.generic_usb_ohci, It looks like usb_board_init/stop and
> usb_cpu_init/stop
> functions are missing and needs to be implemented.
Exactly.
Best regards
Markus Klotzbuecher
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
More information about the U-Boot
mailing list