[U-Boot-Users] [PATCH 1/1] Re-Submit: Add support for ATMEL AT91SAM9G20EK board.
Ben Warren
biggerbadderben at gmail.com
Tue Jul 29 06:57:49 CEST 2008
Hi Hong,
Thanks for all the hard work. One more thing...
<snip>
> +#if defined(CONFIG_CMD_NET)
> +int board_eth_init(bd_t *bis)
> +{
> + return at91sam9_eth_initialize(bis);
> +}
> +#endif
Here's at91sam9_eth_initialize:
#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
void at91sam9_eth_initialize(bd_t *bi)
{
macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00);
}
#endif
Issues:
1. It returns void
2. It just calls the MACB initializer.
Please change your code to:
extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
int board_eth_init(bd_t *bi)
{
return macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00);
}
#endif
or something like this. I don't know if AT91_BASE_EMAC is visible
from this code, so you may need to modify slightly.
regards,
Ben
More information about the U-Boot
mailing list