[U-Boot-Users] v1.3.4-rc1 released

[Wolfgang Denk]

In message <20080723191215.GA6559 at ld0162-tx32.am.freescale.net> you wrote:
>
> > - at91rm9200dk:
> > 	In file included from /home/wd/git/u-boot/work/include/nand.h:32,
> > 			 from board.c:48:
> > 	/home/wd/git/u-boot/work/include/linux/mtd/nand.h:82:1: warning: "NAND_CTL_SETCLE" redefined
> > 	In file included from /work/wd/tmp-arm/include/config.h:2,
> > 			 from /home/wd/git/u-boot/work/include/common.h:35,
> > 			 from board.c:41:
> > 	/home/wd/git/u-boot/work/include/configs/at91rm9200dk.h:153:1: warning: this is the location of the previous definition
> > 	In file included from /home/wd/git/u-boot/work/include/nand.h:32,
> > 			 from board.c:48:
> > 	/home/wd/git/u-boot/work/include/linux/mtd/nand.h:84:1: warning: "NAND_CTL_CLRCLE" redefined
> > 	In file included from /work/wd/tmp-arm/include/config.h:2,
> > 			 from /home/wd/git/u-boot/work/include/common.h:35,
> > 			 from board.c:41:
> > 	/home/wd/git/u-boot/work/include/configs/at91rm9200dk.h:152:1: warning: this is the location of the previous definition
> 
> This board seems to be using the legacy NAND interface, but doesn't
> define CFG_NAND_LEGACY.  It also doesn't define CONFIG_CMD_NAND; if one
> does so, then it gets build errors (with or without CFG_NAND_LEGACY).
> 
> > - csb637:
> 
> Likewise.

So is there an easy way to fix these boards?


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
You don't need a weatherman to know which way the wind blows.
                                                          - Bob Dylan