[U-Boot-Users] [PATCH] Add MIMC200 board - now uses board_eth_init()

[Scott Wood]

On Tue, Jul 29, 2008 at 09:52:12AM +0100, Mark Jackson wrote:
> I didn't want to use u-boot's "slient boot" options, since they're 
> hard-coded at compile time.  The only place I could think to this was to 
> modify the atmel_usart.c file as above.

It's not hard-coded at compile-time -- set GD_FLG_SILENT in gd->flags
from early board code depending on the state of the GPIO pin.  For
example, 8313erdb does this depending on whether it's booting or resuming
from suspend.

-Scott