[U-Boot-Users] [PATCH] bdinfo not showing correct info about memory size

[Stefan Roese]

Ricardo,

On Wednesday 30 July 2008, Ricardo Ribalda Delgado wrote:
>   I don't think that it is a problem with my board config, otherwhise
> it won't show the correct size using print_num...
>    Maybe other users didn't have any problems because their memory
> size is smaller than 256MB.

Most likely you need to enable 64bit printf format (%ll) support:

#define CFG_64BIT_VSPRINTF
#define CFG_64BIT_STRTOUL

This is already done for all 440 PPC's (include/ppc4xx.h) in the current git 
head. I'll merge this soon into the next branch of my ppc4xx repository, then 
your problem should go away.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================