[U-Boot-Users] [PATCH] NAND: Coding-style fixes
Guennadi Liakhovetski
lg at denx.de
Thu Jul 31 12:42:43 CEST 2008
Signed-off-by: Guennadi Liakhovetski <lg at denx.de>
---
drivers/mtd/nand/nand_base.c | 33 +++++++++++++++++----------------
1 files changed, 17 insertions(+), 16 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 6416d15..49bf51d 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -596,7 +596,7 @@ static void nand_command (struct mtd_info *mtd, unsigned command, int column, in
/*
* program and erase have their own busy handlers
* status and sequential in needs no delay
- */
+ */
switch (command) {
case NAND_CMD_PAGEPROG:
@@ -621,7 +621,7 @@ static void nand_command (struct mtd_info *mtd, unsigned command, int column, in
/*
* If we don't have access to the busy pin, we apply the given
* command delay
- */
+ */
if (!this->dev_ready) {
udelay (this->chip_delay);
return;
@@ -690,7 +690,7 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
/*
* program and erase have their own busy handlers
* status and sequential in needs no delay
- */
+ */
switch (command) {
case NAND_CMD_CACHEDPROG:
@@ -726,7 +726,7 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
/*
* If we don't have access to the busy pin, we apply the given
* command delay
- */
+ */
if (!this->dev_ready) {
udelay (this->chip_delay);
return;
@@ -758,7 +758,7 @@ static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int n
/*
* Grab the lock and see if the device is available
- */
+ */
retry:
/* Hardware controller shared among independend devices */
if (this->controller) {
@@ -1070,7 +1070,7 @@ static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int
* is marked as NOAUTOINCR by the board driver.
* Do this also before returning, so the chip is
* ready for the next command.
- */
+ */
if (!this->dev_ready)
udelay (this->chip_delay);
else
@@ -1153,13 +1153,13 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
}
/* Grab the lock and see if the device is available */
- nand_get_device (this, mtd ,FL_READING);
+ nand_get_device (this, mtd, FL_READING);
/* use userspace supplied oobinfo, if zero */
if (oobsel == NULL)
oobsel = &mtd->oobinfo;
- /* Autoplace of oob data ? Use the default placement scheme */
+ /* Autoplace of oob data? Use the default placement scheme */
if (oobsel->useecc == MTD_NANDECC_AUTOPLACE)
oobsel = this->autooob;
@@ -1346,7 +1346,7 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
* Do this before the AUTOINCR check, so no problems
* arise if a chip which does auto increment
* is marked as NOAUTOINCR by the board driver.
- */
+ */
if (!this->dev_ready)
udelay (this->chip_delay);
else
@@ -1369,7 +1369,7 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
}
/* Check, if the chip supports auto page increment
* or if we have hit a block boundary.
- */
+ */
if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))
sndcmd = 1;
}
@@ -1446,7 +1446,7 @@ static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t
* Do this before the AUTOINCR check, so no problems
* arise if a chip which does auto increment
* is marked as NOAUTOINCR by the board driver.
- */
+ */
if (!this->dev_ready)
udelay (this->chip_delay);
else
@@ -1466,7 +1466,7 @@ static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t
/* Check, if the chip supports auto page increment
* or if we have hit a block boundary.
- */
+ */
if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) {
/* For subsequent page reads set offset to 0 */
this->cmdfunc (mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);
@@ -1731,7 +1731,7 @@ static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
/* Have we hit a block boundary ? Then we have to verify and
* if verify is ok, we have to setup the oob buffer for
* the next pages.
- */
+ */
if (!(page & (ppblock - 1))){
int ofs;
this->data_poi = bufstart;
@@ -2376,7 +2376,8 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
if (nand_dev_id != nand_flash_ids[i].id)
continue;
- if (!mtd->name) mtd->name = nand_flash_ids[i].name;
+ if (!mtd->name)
+ mtd->name = nand_flash_ids[i].name;
this->chipsize = nand_flash_ids[i].chipsize << 20;
/* New devices have all the information in additional id bytes */
@@ -2549,7 +2550,7 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
* check ECC mode, default to software
* if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize
* fallback to software ECC
- */
+ */
this->eccsize = 256; /* set default eccsize */
this->eccbytes = 3;
@@ -2597,7 +2598,7 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
/* Check hardware ecc function availability and adjust number of ecc bytes per
* calculation step
- */
+ */
switch (this->eccmode) {
case NAND_ECC_HW12_2048:
this->eccbytes += 4;
--
1.5.4
More information about the U-Boot
mailing list