[U-Boot-Users] [PATCH] NAND_SPL: Remove initdram() call from nand_boot()

[Stefan Roese]

This patch removes the SDRAM initilization call initdram() from
nand_boot(). This is done mainly because I experienced problems with
some boards like Kilauea (405EX), which don't have internal SRAM (OCM)
and relocation needs to be done to SDRAM before the NAND controller
can get accessed. When initdram() is called later on in nand_boot(),
this can lead to problems with variables in the bss sections like
nand_ecc_pos[].

Signed-off-by: Stefan Roese <sr at denx.de>
---
 nand_spl/nand_boot.c |   11 +++++------
 1 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c
index bc57725..563a80b 100644
--- a/nand_spl/nand_boot.c
+++ b/nand_spl/nand_boot.c
@@ -221,20 +221,19 @@ static int nand_load(struct mtd_info *mtd, int offs, int uboot_size, uchar *dst)
 	return 0;
 }
 
+/*
+ * The main entry for NAND booting. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-Boot image
+ * from NAND into SDRAM and starts it from there.
+ */
 void nand_boot(void)
 {
-	ulong mem_size;
 	struct nand_chip nand_chip;
 	nand_info_t nand_info;
 	int ret;
 	void (*uboot)(void);
 
 	/*
-	 * Init sdram, so we have access to memory
-	 */
-	mem_size = initdram(0);
-
-	/*
 	 * Init board specific nand support
 	 */
 	nand_info.priv = &nand_chip;
-- 
1.5.5.3