[U-Boot-Users] [PATCH] NAND_SPL: Remove initdram() call from nand_boot()

Stefan Roese sr at denx.de
Mon Jun 2 21:17:51 CEST 2008


On Monday 02 June 2008, Scott Wood wrote:
> Stefan Roese wrote:
> > This patch removes the SDRAM initilization call initdram() from
> > nand_boot(). This is done mainly because I experienced problems with
> > some boards like Kilauea (405EX), which don't have internal SRAM (OCM)
> > and relocation needs to be done to SDRAM before the NAND controller
> > can get accessed. When initdram() is called later on in nand_boot(),
> > this can lead to problems with variables in the bss sections like
> > nand_ecc_pos[].
> >
> > Signed-off-by: Stefan Roese <sr at denx.de>
>
> Acked-by: Scott Wood <scottwood at freescale.com>
>
> Please send via the 4xx tree in order for the initdram move to be atomic.

OK, will do.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================




More information about the U-Boot mailing list