[U-Boot-Users] u-boot-1.2.0 cross compilation fails

[Detlev Zundel]

Hi George,

> I was trying to build u-boot-1.2.0 for atmel (u-boot
> source code delivered by the board vendor). Tried
> this:
>
> $ make CROSS_COMPILE=arm-linux- sam9l9260_config
> $ make CROSS_COMPILE=arm-linux-
>
> but it failed:
>
> make -C tools all
> make[1]: Entering directory
> `/home/sam9l9260/u-boot-1.2.0-atmel/tools'
> make[1]: *** No rule to make target
> `/usr/lib/gcc/i686-pc-cygwin/3.4.4/include/stddef.h',
> needed by `img2srec.o'.  Stop.
> make[1]: Leaving directory
> `/home/sam9l9260/u-boot-1.2.0-atmel/tools'
> make: *** [tools] Error 2
>
> Looks like some header file related to Cygwin (which I
> don't need use). I'm cross-compiling on Linux etch.
> Tried poking into Makefile but to no avail.

Complain to where you got the sources from.  In the official U-Boot
1.2.0 there is no sam9l9260 support.  We cannot help you here much I'm
afraid.

Cheers
  Detlev

-- 
It's very important  that you sleep because that's  when your brain is
garbage  collecting.  And a  dream is  if you  are interrupted  in the
middle and have junk left in the registers.
                                          -- Gerald Sussman
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de