[U-Boot-Users] [PATCH] Remove the obsolete cfg definition
Dave Liu
daveliu.os at gmail.com
Sat Jun 7 09:37:36 CEST 2008
From: Dave Liu <daveliu at freescale.com>
The rtl8139 driver doesn't need KSEG again, remove
it. the _IO_BASE has default value as 0, so also
remove it.
Signed-off-by: Dave Liu <daveliu at freescale.com>
---
include/configs/HIDDEN_DRAGON.h | 3 ---
include/configs/MPC8349ITX.h | 6 ------
include/configs/MPC8544DS.h | 6 ------
include/configs/MPC8610HPCD.h | 4 ----
include/configs/MPC8641HPCN.h | 4 ----
include/configs/mpc7448hpc2.h | 3 ---
6 files changed, 0 insertions(+), 26 deletions(-)
diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h
index 26dd954..33e5939 100644
--- a/include/configs/HIDDEN_DRAGON.h
+++ b/include/configs/HIDDEN_DRAGON.h
@@ -103,9 +103,6 @@
#define PCI_ENET1_MEMADDR 0x81000000
#define CONFIG_RTL8139
-#define _IO_BASE 0x00000000
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x) (x)
/* Make sure the ethaddr can be overwritten
TODO: Remove this on final product
*/
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 38410a1..dfacbe1 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -347,16 +347,10 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */
#endif
-#define _IO_BASE 0x00000000 /* points to PCI I/O space */
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#ifdef CONFIG_RTL8139
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x) (x)
-#endif
-
#ifndef CONFIG_PCI_PNP
#define PCI_ENET0_IOADDR 0x00000000
#define PCI_ENET0_MEMADDR CFG_PCI2_MEM_BASE
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index ffe9e00..1e77808 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -325,12 +325,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#undef CONFIG_TULIP
#define CONFIG_RTL8139
-#ifdef CONFIG_RTL8139
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x) (x)
-#define _IO_BASE 0x00000000
-#endif
-
#ifndef CONFIG_PCI_PNP
#define PCI_ENET0_IOADDR CFG_PCI1_IO_BASE
#define PCI_ENET0_MEMADDR CFG_PCI1_IO_BASE
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index a051b6d..a0ad515 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -288,10 +288,6 @@
#define CFG_PCI_MEMORY_PHYS 0x00000000
#define CFG_PCI_MEMORY_SIZE 0x80000000
-/* For RTL8139 */
-#define KSEG1ADDR(x) ({u32 _x = le32_to_cpu(*(u32 *)(x)); (&_x); })
-#define _IO_BASE 0x00000000
-
/* controller 1, Base address 0xa000 */
#define CFG_PCIE1_MEM_BASE 0xa0000000
#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 49ee7ff..f959367 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -313,10 +313,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CFG_PCI_MEMORY_PHYS 0x00000000
#define CFG_PCI_MEMORY_SIZE 0x80000000
-/* For RTL8139 */
-#define KSEG1ADDR(x) ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);})
-#define _IO_BASE 0x00000000
-
#define CFG_PCI2_MEM_BASE 0xa0000000
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index a218f75..e426f41 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -123,8 +123,6 @@
/* Networking Configuration */
-#define KSEG1ADDR(a) (a) /* Needed by the rtl8139 driver */
-
#define CONFIG_TSI108_ETH
#define CONFIG_TSI108_ETH_NUM_PORTS 2
@@ -301,7 +299,6 @@
#define CFG_PCI_IO_SIZE 0x01000000 /* 16MB */
-#define _IO_BASE 0x00000000 /* points to PCI I/O space */
/* PCI Config Space mapping */
#define CFG_PCI_CFG_BASE 0xfb000000 /* Changed from FE000000 */
--
1.5.5
More information about the U-Boot
mailing list