[U-Boot-Users] Stops booting after RAM info

[Andrejs Cainikovs]

navin karnam wrote:
> Hi all,
>
> The flash chip in my board is Intel 28F256P33T
> which is not defined in the u-boot-1.1.6/include/flash.h
>
> Please guide what is the procedure i should follow to add it.
I suppose You haven't read a lot of your own thread..
Use CFI + add your flash ID. 
http://www.numonyx.com/Documents/Datasheets/314749_P33_Discrete_DS.pdf, 
page 78 - Table 36: CFI Identification

Kind regards,
Andrejs Cainikovs.