[U-Boot-Users] LL_TEMAC on Avnet MiniModule-FX12

[llandre]

> that's why you use opb_emac driver for ll_temac. That's all. Different driver
> and different ip_core.
I see. I erroneously understood that this driver supports every (t)emac 
flavours.

Thanks for your help,
llandre

DAVE Electronics System House - R&D Department
web:   http://www.dave.eu
email: r&d2 at dave-tech.it

>> Hi all,
>>
>> I ported U-Boot 1.3.1 on Avnet MiniModule-FX12 (the repository I'm 
>> working with has been patched previously with ML403 patch). Here is my 
>> first dirty patch:
>>
>> http://www.dave.eu/download/misc/mmfx12/mmfx12-0.8.3.patch
>>
>> U-Boot works fine and it boots correctly from flash, however ethernet 
>> interface (LL_TEMAC) does not work.
>> For example, when I try to perform a TFTP download, the XEmac_PollSend 
>> function never returns because the following loop never ends:
>>
>> /*
>>   * Loop on the MAC's status to wait for the transmit to complete. The
>>   * transmit status is in the FIFO when the XMIT_DONE bit is set.
>>   */
>> do {
>>      IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
>> }
>> while ((IntrStatus & XEM_EIR_XMIT_DONE_MASK) == 0);
>>
>> Please note that the FPGA bitstream is ok because the linux kernel works 
>> fine and can mount root file system via NFS so I pretty sure something 
>> is wrong in my U-Boot port.
>>
>> Anybody experienced similar problems?
>>
>>
>> TIA,
>> llandre
>>
>> DAVE Electronics System House - R&D Department
>> web:   http://www.dave.eu
>> email: r&d2 at dave-tech.it
>>
>> -------------------------------------------------------------------------
>> Check out the new SourceForge.net Marketplace.
>> It's the best place to buy or sell services for
>> just about anything Open Source.
>> http://sourceforge.net/services/buy/index.php
>> _______________________________________________
>> U-Boot-Users mailing list
>> U-Boot-Users at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>>
> 
> 
>