[U-Boot-Users] [PATCH] fix non-working mvBL-M7

[André Schwarz]

Kim,

thanks - ok.

Switching to U_BOOT_VERSION should be no problem.

regards,
André

Kim Phillips schrieb:
> On Mon, 23 Jun 2008 13:25:34 +0200
> Andre Schwarz <andre.schwarz at matrix-vision.de> wrote:
> 
> Hello Andre,
> 
>> diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
>> index 349ca14..8c0e8b6 100644
>> --- a/include/configs/MVBLM7.h
>> +++ b/include/configs/MVBLM7.h
>> @@ -27,7 +27,7 @@
>>  #ifndef __CONFIG_H
>>  #define __CONFIG_H
>>  
>> -#define MV_VERSION  "v1.0.1"
>> +#define MV_VERSION  "v1.0.2"
> 
> instead of incrementing this for each patch, can we just use
> U_BOOT_VERSION instead?
> 
>>  #define CONFIG_HAS_ETH0
>> +#define CONFIG_ETHADDR          b6:b4:45:eb:fb:c0
>>  #define CONFIG_TSEC1_NAME	"TSEC0"
>>  #define CONFIG_FEC1_PHY_NORXERR
>>  #define CFG_TSEC1_OFFSET	0x24000
>> @@ -224,6 +225,7 @@
>>  #define TSEC1_FLAGS		(TSEC_GIGABIT|TSEC_REDUCED)
>>  
>>  #define CONFIG_HAS_ETH1
>> +#define CONFIG_ETH1ADDR         b6:b4:45:eb:fb:c2
>>  #define CONFIG_TSEC2_NAME  	"TSEC1"
> 
> I had removed this from your original board port because this goes
> against recommended practice; see:
> 
> http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/41178
> 
>> +#define CONFIG_HIGH_BATS       1
> 
> this line applied.
> 
> Kim


MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler  - Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner