[U-Boot-Users] [PATCH] ppc4xx: Continue cleanup of ppc440.h
Stefan Roese
sr at denx.de
Mon Jun 30 14:12:51 CEST 2008
This patch continues the ppc440.h cleanup by removing some of the unused
defines.
Signed-off-by: Stefan Roese <sr at denx.de>
---
include/ppc440.h | 305 +-----------------------------------------------------
1 files changed, 3 insertions(+), 302 deletions(-)
diff --git a/include/ppc440.h b/include/ppc440.h
index dd7a64c..2a4526e 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -77,7 +77,6 @@
#define tbl 0x11c /* time base lower (supervisor)*/
#define tbu 0x11d /* time base upper (supervisor)*/
#define pir 0x11e /* processor id register */
-/*#define pvr 0x11f processor version register */
#define dbsr 0x130 /* debug status register */
#define dbcr0 0x134 /* debug control register 0 */
#define dbcr1 0x135 /* debug control register 1 */
@@ -268,86 +267,6 @@
#define sdr_sdstp6 0x4005
#define sdr_sdstp7 0x4007
-/******************************************************************************
- * PCI express defines
- ******************************************************************************/
-#define SDR0_PE0UTLSET1 0x00000300 /* PE0 Upper transaction layer conf setting */
-#define SDR0_PE0UTLSET2 0x00000301 /* PE0 Upper transaction layer conf setting 2 */
-#define SDR0_PE0DLPSET 0x00000302 /* PE0 Data link & logical physical configuration */
-#define SDR0_PE0LOOP 0x00000303 /* PE0 Loopback interface status */
-#define SDR0_PE0RCSSET 0x00000304 /* PE0 Reset, clock & shutdown setting */
-#define SDR0_PE0RCSSTS 0x00000305 /* PE0 Reset, clock & shutdown status */
-#define SDR0_PE0HSSSET1L0 0x00000306 /* PE0 HSS Control Setting 1: Lane 0 */
-#define SDR0_PE0HSSSET2L0 0x00000307 /* PE0 HSS Control Setting 2: Lane 0 */
-#define SDR0_PE0HSSSTSL0 0x00000308 /* PE0 HSS Control Status : Lane 0 */
-#define SDR0_PE0HSSSET1L1 0x00000309 /* PE0 HSS Control Setting 1: Lane 1 */
-#define SDR0_PE0HSSSET2L1 0x0000030A /* PE0 HSS Control Setting 2: Lane 1 */
-#define SDR0_PE0HSSSTSL1 0x0000030B /* PE0 HSS Control Status : Lane 1 */
-#define SDR0_PE0HSSSET1L2 0x0000030C /* PE0 HSS Control Setting 1: Lane 2 */
-#define SDR0_PE0HSSSET2L2 0x0000030D /* PE0 HSS Control Setting 2: Lane 2 */
-#define SDR0_PE0HSSSTSL2 0x0000030E /* PE0 HSS Control Status : Lane 2 */
-#define SDR0_PE0HSSSET1L3 0x0000030F /* PE0 HSS Control Setting 1: Lane 3 */
-#define SDR0_PE0HSSSET2L3 0x00000310 /* PE0 HSS Control Setting 2: Lane 3 */
-#define SDR0_PE0HSSSTSL3 0x00000311 /* PE0 HSS Control Status : Lane 3 */
-#define SDR0_PE0HSSSET1L4 0x00000312 /* PE0 HSS Control Setting 1: Lane 4 */
-#define SDR0_PE0HSSSET2L4 0x00000313 /* PE0 HSS Control Setting 2: Lane 4 */
-#define SDR0_PE0HSSSTSL4 0x00000314 /* PE0 HSS Control Status : Lane 4 */
-#define SDR0_PE0HSSSET1L5 0x00000315 /* PE0 HSS Control Setting 1: Lane 5 */
-#define SDR0_PE0HSSSET2L5 0x00000316 /* PE0 HSS Control Setting 2: Lane 5 */
-#define SDR0_PE0HSSSTSL5 0x00000317 /* PE0 HSS Control Status : Lane 5 */
-#define SDR0_PE0HSSSET1L6 0x00000318 /* PE0 HSS Control Setting 1: Lane 6 */
-#define SDR0_PE0HSSSET2L6 0x00000319 /* PE0 HSS Control Setting 2: Lane 6 */
-#define SDR0_PE0HSSSTSL6 0x0000031A /* PE0 HSS Control Status : Lane 6 */
-#define SDR0_PE0HSSSET1L7 0x0000031B /* PE0 HSS Control Setting 1: Lane 7 */
-#define SDR0_PE0HSSSET2L7 0x0000031C /* PE0 HSS Control Setting 2: Lane 7 */
-#define SDR0_PE0HSSSTSL7 0x0000031D /* PE0 HSS Control Status : Lane 7 */
-#define SDR0_PE0HSSSEREN 0x0000031E /* PE0 Serdes Transmitter Enable */
-#define SDR0_PE0LANEABCD 0x0000031F /* PE0 Lanes ABCD affectation */
-#define SDR0_PE0LANEEFGH 0x00000320 /* PE0 Lanes EFGH affectation */
-
-#define SDR0_PE1UTLSET1 0x00000340 /* PE1 Upper transaction layer conf setting */
-#define SDR0_PE1UTLSET2 0x00000341 /* PE1 Upper transaction layer conf setting 2 */
-#define SDR0_PE1DLPSET 0x00000342 /* PE1 Data link & logical physical configuration */
-#define SDR0_PE1LOOP 0x00000343 /* PE1 Loopback interface status */
-#define SDR0_PE1RCSSET 0x00000344 /* PE1 Reset, clock & shutdown setting */
-#define SDR0_PE1RCSSTS 0x00000345 /* PE1 Reset, clock & shutdown status */
-#define SDR0_PE1HSSSET1L0 0x00000346 /* PE1 HSS Control Setting 1: Lane 0 */
-#define SDR0_PE1HSSSET2L0 0x00000347 /* PE1 HSS Control Setting 2: Lane 0 */
-#define SDR0_PE1HSSSTSL0 0x00000348 /* PE1 HSS Control Status : Lane 0 */
-#define SDR0_PE1HSSSET1L1 0x00000349 /* PE1 HSS Control Setting 1: Lane 1 */
-#define SDR0_PE1HSSSET2L1 0x0000034A /* PE1 HSS Control Setting 2: Lane 1 */
-#define SDR0_PE1HSSSTSL1 0x0000034B /* PE1 HSS Control Status : Lane 1 */
-#define SDR0_PE1HSSSET1L2 0x0000034C /* PE1 HSS Control Setting 1: Lane 2 */
-#define SDR0_PE1HSSSET2L2 0x0000034D /* PE1 HSS Control Setting 2: Lane 2 */
-#define SDR0_PE1HSSSTSL2 0x0000034E /* PE1 HSS Control Status : Lane 2 */
-#define SDR0_PE1HSSSET1L3 0x0000034F /* PE1 HSS Control Setting 1: Lane 3 */
-#define SDR0_PE1HSSSET2L3 0x00000350 /* PE1 HSS Control Setting 2: Lane 3 */
-#define SDR0_PE1HSSSTSL3 0x00000351 /* PE1 HSS Control Status : Lane 3 */
-#define SDR0_PE1HSSSEREN 0x00000352 /* PE1 Serdes Transmitter Enable */
-#define SDR0_PE1LANEABCD 0x00000353 /* PE1 Lanes ABCD affectation */
-#define SDR0_PE2UTLSET1 0x00000370 /* PE2 Upper transaction layer conf setting */
-#define SDR0_PE2UTLSET2 0x00000371 /* PE2 Upper transaction layer conf setting 2 */
-#define SDR0_PE2DLPSET 0x00000372 /* PE2 Data link & logical physical configuration */
-#define SDR0_PE2LOOP 0x00000373 /* PE2 Loopback interface status */
-#define SDR0_PE2RCSSET 0x00000374 /* PE2 Reset, clock & shutdown setting */
-#define SDR0_PE2RCSSTS 0x00000375 /* PE2 Reset, clock & shutdown status */
-#define SDR0_PE2HSSSET1L0 0x00000376 /* PE2 HSS Control Setting 1: Lane 0 */
-#define SDR0_PE2HSSSET2L0 0x00000377 /* PE2 HSS Control Setting 2: Lane 0 */
-#define SDR0_PE2HSSSTSL0 0x00000378 /* PE2 HSS Control Status : Lane 0 */
-#define SDR0_PE2HSSSET1L1 0x00000379 /* PE2 HSS Control Setting 1: Lane 1 */
-#define SDR0_PE2HSSSET2L1 0x0000037A /* PE2 HSS Control Setting 2: Lane 1 */
-#define SDR0_PE2HSSSTSL1 0x0000037B /* PE2 HSS Control Status : Lane 1 */
-#define SDR0_PE2HSSSET1L2 0x0000037C /* PE2 HSS Control Setting 1: Lane 2 */
-#define SDR0_PE2HSSSET2L2 0x0000037D /* PE2 HSS Control Setting 2: Lane 2 */
-#define SDR0_PE2HSSSTSL2 0x0000037E /* PE2 HSS Control Status : Lane 2 */
-#define SDR0_PE2HSSSET1L3 0x0000037F /* PE2 HSS Control Setting 1: Lane 3 */
-#define SDR0_PE2HSSSET2L3 0x00000380 /* PE2 HSS Control Setting 2: Lane 3 */
-#define SDR0_PE2HSSSTSL3 0x00000381 /* PE2 HSS Control Status : Lane 3 */
-#define SDR0_PE2HSSSEREN 0x00000382 /* PE2 Serdes Transmitter Enable */
-#define SDR0_PE2LANEABCD 0x00000383 /* PE2 Lanes ABCD affectation */
-#define SDR0_PEGPLLSET1 0x000003A0 /* PE Pll LC Tank Setting1 */
-#define SDR0_PEGPLLSET2 0x000003A1 /* PE Pll LC Tank Setting2 */
-#define SDR0_PEGPLLSTS 0x000003A2 /* PE Pll LC Tank Status */
#endif /* CONFIG_440SPE */
/*-----------------------------------------------------------------------------
@@ -862,102 +781,6 @@
#define cntrl0 (CNTRL_DCR_BASE+0x3b) /* Control 0 register */
#define cntrl1 (CNTRL_DCR_BASE+0x3a) /* Control 1 register */
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX)
-/*----------------------------------------------------------------------------+
-| Clock / Power-on-reset DCR's.
-+----------------------------------------------------------------------------*/
-#define CPR0_CLKUPD 0x20
-#define CPR0_CLKUPD_BSY_MASK 0x80000000
-#define CPR0_CLKUPD_BSY_COMPLETED 0x00000000
-#define CPR0_CLKUPD_BSY_BUSY 0x80000000
-#define CPR0_CLKUPD_CUI_MASK 0x80000000
-#define CPR0_CLKUPD_CUI_DISABLE 0x00000000
-#define CPR0_CLKUPD_CUI_ENABLE 0x80000000
-#define CPR0_CLKUPD_CUD_MASK 0x40000000
-#define CPR0_CLKUPD_CUD_DISABLE 0x00000000
-#define CPR0_CLKUPD_CUD_ENABLE 0x40000000
-
-#define CPR0_PLLC 0x40
-#define CPR0_PLLC_RST_MASK 0x80000000
-#define CPR0_PLLC_RST_PLLLOCKED 0x00000000
-#define CPR0_PLLC_RST_PLLRESET 0x80000000
-#define CPR0_PLLC_ENG_MASK 0x40000000
-#define CPR0_PLLC_ENG_DISABLE 0x00000000
-#define CPR0_PLLC_ENG_ENABLE 0x40000000
-#define CPR0_PLLC_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
-#define CPR0_PLLC_ENG_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
-#define CPR0_PLLC_SRC_MASK 0x20000000
-#define CPR0_PLLC_SRC_PLLOUTA 0x00000000
-#define CPR0_PLLC_SRC_PLLOUTB 0x20000000
-#define CPR0_PLLC_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
-#define CPR0_PLLC_SRC_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
-#define CPR0_PLLC_SEL_MASK 0x07000000
-#define CPR0_PLLC_SEL_PLLOUT 0x00000000
-#define CPR0_PLLC_SEL_CPU 0x01000000
-#define CPR0_PLLC_SEL_EBC 0x05000000
-#define CPR0_PLLC_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
-#define CPR0_PLLC_SEL_DECODE(n) ((((unsigned long)(n))>>24)&0x07)
-#define CPR0_PLLC_TUNE_MASK 0x000003FF
-#define CPR0_PLLC_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
-#define CPR0_PLLC_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
-
-#define CPR0_PLLD 0x60
-#define CPR0_PLLD_FBDV_MASK 0x1F000000
-#define CPR0_PLLD_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define CPR0_PLLD_FBDV_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x1F)+1)
-#define CPR0_PLLD_FWDVA_MASK 0x000F0000
-#define CPR0_PLLD_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<16)
-#define CPR0_PLLD_FWDVA_DECODE(n) ((((((unsigned long)(n))>>16)-1)&0x0F)+1)
-#define CPR0_PLLD_FWDVB_MASK 0x00000700
-#define CPR0_PLLD_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<8)
-#define CPR0_PLLD_FWDVB_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x07)+1)
-#define CPR0_PLLD_LFBDV_MASK 0x0000003F
-#define CPR0_PLLD_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
-#define CPR0_PLLD_LFBDV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1)
-
-#define CPR0_PRIMAD 0x80
-#define CPR0_PRIMAD_PRADV0_MASK 0x07000000
-#define CPR0_PRIMAD_PRADV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
-#define CPR0_PRIMAD_PRADV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
-
-#define CPR0_PRIMBD 0xA0
-#define CPR0_PRIMBD_PRBDV0_MASK 0x07000000
-#define CPR0_PRIMBD_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
-#define CPR0_PRIMBD_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
-
-#define CPR0_OPBD 0xC0
-#define CPR0_OPBD_OPBDV0_MASK 0x03000000
-#define CPR0_OPBD_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
-#define CPR0_OPBD_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
-
-#define CPR0_PERD 0xE0
-#if !defined(CONFIG_440EPX)
-#define CPR0_PERD_PERDV0_MASK 0x03000000
-#define CPR0_PERD_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
-#define CPR0_PERD_PERDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
-#endif
-
-#define CPR0_MALD 0x100
-#define CPR0_MALD_MALDV0_MASK 0x03000000
-#define CPR0_MALD_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
-#define CPR0_MALD_MALDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
-
-#define CPR0_ICFG 0x140
-#define CPR0_ICFG_RLI_MASK 0x80000000
-#define CPR0_ICFG_RLI_RESETCPR 0x00000000
-#define CPR0_ICFG_RLI_PRESERVECPR 0x80000000
-#define CPR0_ICFG_ICS_MASK 0x00000007
-#define CPR0_ICFG_ICS_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
-#define CPR0_ICFG_ICS_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1)
-
-/************************/
-/* IIC defines */
-/************************/
-#define IIC0_MMIO_BASE 0xA0000400
-#define IIC1_MMIO_BASE 0xA0000500
-
-#endif /* CONFIG_440SP */
-
/*-----------------------------------------------------------------------------
| DMA
+----------------------------------------------------------------------------*/
@@ -2078,118 +1901,10 @@
#endif /* CONFIG_440GX */
#if defined (CONFIG_440EPX) || defined (CONFIG_440GRX)
-/*--------------------------------------*/
-#define CPR0_PLLC 0x40
-#define CPR0_PLLC_RST_MASK 0x80000000
-#define CPR0_PLLC_RST_PLLLOCKED 0x00000000
-#define CPR0_PLLC_RST_PLLRESET 0x80000000
-#define CPR0_PLLC_ENG_MASK 0x40000000
-#define CPR0_PLLC_ENG_DISABLE 0x00000000
-#define CPR0_PLLC_ENG_ENABLE 0x40000000
-#define CPR0_PLLC_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
-#define CPR0_PLLC_ENG_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
-#define CPR0_PLLC_SRC_MASK 0x20000000
-#define CPR0_PLLC_SRC_PLLOUTA 0x00000000
-#define CPR0_PLLC_SRC_PLLOUTB 0x20000000
-#define CPR0_PLLC_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
-#define CPR0_PLLC_SRC_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
-#define CPR0_PLLC_SEL_MASK 0x07000000
-#define CPR0_PLLC_SEL_PLL 0x00000000
-#define CPR0_PLLC_SEL_CPU 0x01000000
-#define CPR0_PLLC_SEL_PER 0x05000000
-#define CPR0_PLLC_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
-#define CPR0_PLLC_SEL_DECODE(n) ((((unsigned long)(n))>>24)&0x07)
-#define CPR0_PLLC_TUNE_MASK 0x000003FF
-#define CPR0_PLLC_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
-#define CPR0_PLLC_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
-/*--------------------------------------*/
-#define CPR0_PLLD 0x60
-#define CPR0_PLLD_FBDV_MASK 0x1F000000
-#define CPR0_PLLD_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define CPR0_PLLD_FBDV_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x1F)+1)
-#define CPR0_PLLD_FWDVA_MASK 0x000F0000
-#define CPR0_PLLD_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<16)
-#define CPR0_PLLD_FWDVA_DECODE(n) ((((((unsigned long)(n))>>16)-1)&0x0F)+1)
-#define CPR0_PLLD_FWDVB_MASK 0x00000700
-#define CPR0_PLLD_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<8)
-#define CPR0_PLLD_FWDVB_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x07)+1)
-#define CPR0_PLLD_LFBDV_MASK 0x0000003F
-#define CPR0_PLLD_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
-#define CPR0_PLLD_LFBDV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1)
-/*--------------------------------------*/
-#define CPR0_PRIMAD 0x80
-#define CPR0_PRIMAD_PRADV0_MASK 0x07000000
-#define CPR0_PRIMAD_PRADV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
-#define CPR0_PRIMAD_PRADV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
-/*--------------------------------------*/
-#define CPR0_PRIMBD 0xA0
-#define CPR0_PRIMBD_PRBDV0_MASK 0x07000000
-#define CPR0_PRIMBD_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
-#define CPR0_PRIMBD_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
-/*--------------------------------------*/
-#if 0
-#define CPR0_CPM0_ER 0xB0 /* CPM Enable Register */
-#define CPR0_CPM0_FR 0xB1 /* CPM Force Register */
-#define CPR0_CPM0_SR 0xB2 /* CPM Status Register */
-#define CPR0_CPM0_IIC0 0x80000000 /* Inter-Intergrated Circuit0 */
-#define CPR0_CPM0_IIC1 0x40000000 /* Inter-Intergrated Circuit1 */
-#define CPR0_CPM0_PCI 0x20000000 /* Peripheral Component Interconnect */
-#define CPR0_CPM0_USB1H 0x08000000 /* USB1.1 Host */
-#define CPR0_CPM0_FPU 0x04000000 /* PPC440 FPU */
-#define CPR0_CPM0_CPU 0x02000000 /* PPC440x5 Processor Core */
-#define CPR0_CPM0_DMA 0x01000000 /* Direct Memory Access Controller */
-#define CPR0_CPM0_BGO 0x00800000 /* PLB to OPB Bridge */
-#define CPR0_CPM0_BGI 0x00400000 /* OPB to PLB Bridge */
-#define CPR0_CPM0_EBC 0x00200000 /* External Bus Controller */
-#define CPR0_CPM0_NDFC 0x00100000 /* Nand Flash Controller */
-#define CPR0_CPM0_MADMAL 0x00080000 /* DDR SDRAM Controller or MADMAL ??? */
-#define CPR0_CPM0_DMC 0x00080000 /* DDR SDRAM Controller or MADMAL ??? */
-#define CPR0_CPM0_PLB4 0x00040000 /* PLB4 Arbiter */
-#define CPR0_CPM0_PLB4x3x 0x00020000 /* PLB4 to PLB3 */
-#define CPR0_CPM0_PLB3x4x 0x00010000 /* PLB3 to PLB4 */
-#define CPR0_CPM0_PLB3 0x00008000 /* PLB3 Arbiter */
-#define CPR0_CPM0_PPM 0x00002000 /* PLB Performance Monitor */
-#define CPR0_CPM0_UIC1 0x00001000 /* Universal Interrupt Controller 1 */
-#define CPR0_CPM0_GPIO 0x00000800 /* General Purpose IO */
-#define CPR0_CPM0_GPT 0x00000400 /* General Purpose Timer */
-#define CPR0_CPM0_UART0 0x00000200 /* Universal Asynchronous Rcver/Xmitter 0 */
-#define CPR0_CPM0_UART1 0x00000100 /* Universal Asynchronous Rcver/Xmitter 1 */
-#define CPR0_CPM0_UIC0 0x00000080 /* Universal Interrupt Controller 0 */
-#define CPR0_CPM0_TMRCLK 0x00000040 /* CPU Timer */
-#define CPR0_CPM0_EMC0 0x00000020 /* Ethernet 0 */
-#define CPR0_CPM0_EMC1 0x00000010 /* Ethernet 1 */
-#define CPR0_CPM0_UART2 0x00000008 /* Universal Asynchronous Rcver/Xmitter 2 */
-#define CPR0_CPM0_UART3 0x00000004 /* Universal Asynchronous Rcver/Xmitter 3 */
-#define CPR0_CPM0_USB2D 0x00000002 /* USB2.0 Device */
-#define CPR0_CPM0_USB2H 0x00000001 /* USB2.0 Host */
+#define CPR0_ICFG_RLI_MASK 0x80000000
+#define CPR0_SPCID_SPCIDV0_MASK 0x03000000
+#define CPR0_PERD_PERDV0_MASK 0x07000000
#endif
-/*--------------------------------------*/
-#define CPR0_OPBD 0xC0
-#define CPR0_OPBD_OPBDV0_MASK 0x03000000
-#define CPR0_OPBD_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
-#define CPR0_OPBD_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
-/*--------------------------------------*/
-#define CPR0_PERD 0xE0
-#define CPR0_PERD_PERDV0_MASK 0x07000000
-#define CPR0_PERD_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
-#define CPR0_PERD_PERDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
-/*--------------------------------------*/
-#define CPR0_MALD 0x100
-#define CPR0_MALD_MALDV0_MASK 0x03000000
-#define CPR0_MALD_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
-#define CPR0_MALD_MALDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
-/*--------------------------------------*/
-#define CPR0_SPCID 0x120
-#define CPR0_SPCID_SPCIDV0_MASK 0x03000000
-#define CPR0_SPCID_SPCIDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
-#define CPR0_SPCID_SPCIDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
-/*--------------------------------------*/
-#define CPR0_ICFG 0x140
-#define CPR0_ICFG_RLI_MASK 0x80000000
-#define CPR0_ICFG_RLI_RESETCPR 0x00000000
-#define CPR0_ICFG_RLI_PRESERVECPR 0x80000000
-#define CPR0_ICFG_ICS_MASK 0x00000007
-#endif /* defined (CONFIG_440EPX) || defined (CONFIG_440GRX) */
/*-----------------------------------------------------------------------------
| IIC Register Offsets
@@ -2211,20 +1926,6 @@
#define IICDIRECTCNTL 0x10
/*-----------------------------------------------------------------------------
-| UART Register Offsets
-'----------------------------------------------------------------------------*/
-#define DATA_REG 0x00
-#define DL_LSB 0x00
-#define DL_MSB 0x01
-#define INT_ENABLE 0x01
-#define FIFO_CONTROL 0x02
-#define LINE_CONTROL 0x03
-#define MODEM_CONTROL 0x04
-#define LINE_STATUS 0x05
-#define MODEM_STATUS 0x06
-#define SCRATCH 0x07
-
-/*-----------------------------------------------------------------------------
| PCI Internal Registers et. al. (accessed via plb)
+----------------------------------------------------------------------------*/
#define PCIX0_CFGADR (CFG_PCI_BASE + 0x0ec00000)
--
1.5.6.1
More information about the U-Boot
mailing list