[U-Boot-Users] Writing JFFS2 image using u-boot

[Maupin, Chase]

Sorry, I forgot to add a subject.

Sincerely,
Chase Maupin
Software Applications
Catalog DSP Products
e-mail: chase.maupin at ti.com
phone: (281) 274-3285
 

> -----Original Message-----
> From: u-boot-users-bounces at lists.sourceforge.net 
> [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf 
> Of Maupin, Chase
> Sent: Friday, February 29, 2008 3:19 PM
> To: Stefan Roese
> Cc: u-boot-users at lists.sourceforge.net
> Subject: [U-Boot-Users] (no subject)
> 
> 
> > 
> > On Friday 29 February 2008, Maupin, Chase wrote:
> > > I'm a little confused here.  I have been trying to write a
> > jffs2 image
> > > to NAND flash using u-boot 1.2.0 but when I do so I cannot
> > mount the
> > > file system when booting the kernel.
> > 
> > What error messages do you get?
> 
> I see is ECC errors for every read such as the following.
> mtd->read(0x400 bytes from 0x0) returned ECC error read(0x7c3c bytes 
> mtd->from 0x3c4) returned ECC error
> 
> I also noticed a bunch of magic bitmask erros such as the following.
> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0007861c:
> 0x0162 instead
> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00078620:
> 0x61c8 instead
> 
> > 
> > > It looks from your e-mail thread
> > > that there is a problem with the write.jffs2
> > implementation.  Is this
> > > problem in the 1.2.0 version of u-boot?
> > 
> > No, I don't think so. This thread was related to problem with the 
> > rewrite of the U-Boot NAND subsystem. The current implementation 
> > should handle writing images (YAFFS, JFFS2) just fine. Please make 
> > sure that you use the ".jffs2"
> > extension.
> 
> I wrote the image by doing (my file system partition is at 
> offset 0x460000 and my jffs2 image size is 0x288000 
> downloaded to 0x80700000):
> 	# nand erase 0x460000 0x288000
> 	# nand write.jffs2 0x80700000 0x460000 0x288000
> 
> I can successfully write this same image from a booted Linux 
> system using the "nandwrite" command.
> 
> > 
> > > Do you know if there is a fix
> > > for this?
> > >
> > > Please let me know if you have more information.
> > 
> > It would be much better, if you wrote to the mailing list too. This 
> > way many people could try to help out here. So I suggest to 
> send you 
> > question again to the list.
> 
> I am including the list here.  Any help someone can give on writing a
> JFFS2 image into NAND Flash would be greatly appreciated.
> 
> > 
> > Thanks.
> > 
> > Best regards,
> > Stefan
> > 
> > 
> =====================================================================
> > DENX Software Engineering GmbH,     MD: Wolfgang Denk & 
> Detlev Zundel
> > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 
> Groebenzell, Germany
> > Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: 
> > office at denx.de
> > 
> =====================================================================
> > 
> 
> --------------------------------------------------------------
> -----------
> This SF.net email is sponsored by: Microsoft Defy all 
> challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>