[U-Boot-Users] [PATCHJ PPC4xx enet crossover

[Wolfgang Denk]

In message <2C7DE72B9BD00F44BAECA5B0CBB873950729E6 at hermes.terascala.com> you wrote:
> There were differences in the PHY setup between Linux and U-Boot.
> 
> This patch fixes the problem. Apparently "remote fault" is being set,
> which signals to some devices (on the other end of the cable) that a
> fault has occurred, while other devices ignore it. I believe the RF bit
> was causing the issue, but I removed T4 also, to match up with Linux.
> 
> Signed-off-by: Mike Nuss <mike at terascala.com>

Applied, thanks.


Note: you might also try enabling the (new) CONFIG_PHY_DYNAMIC_ANEG
option on your board; this works for us, too.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I express preference for a chronological  sequence  of  events  which
precludes a violence.   - Terry Pratchett, _The Dark Side of the Sun_