[U-Boot-Users] FPGA mess

[Heiko Schocher]

Hello Stefan,

Stefan Roese wrote:
> On Thursday 06 March 2008, Andre Schwarz wrote:
>> Stefan Roese schrieb:
>>> On Wednesday 05 March 2008, Andre Schwarz wrote:
[...]
>> There's a include/ACEX1K.h that introduces two interfaces for obviously
>> the same funtionality.
>> The first one is specific to ACEX1K and the other one is a general
>> cyclone implementation as it should be.
> 
> Please clean it up too.

Maybe we should do a cyclon2.h ?

>>>> include/ACEX1K.h
>>>> Obviously there are some confusions about the various file formats and
>>>> sizes that can be output
>>>> from Altera's SoPC Builder. Compression is also possible with
>>>> de-compression on the fly during load ...
>>>> Of course the defined file sizes should match a raw bit file that
>>>> represents the true size of the device.
>>>>
>>>> Why is ACEX1K and Cyclone not merged ?
>>> No idea. If you have some fixes, please send patches.
>>>
>>>> Does _any_ real board use the Altera path ? scanning the config files
>>>> ... no.
>>> alpr seems to use the cyclone2.c code.
>> no - it uses common/ACEX1K.c .... and common/cyclon2.c is derived from it.
> 
> No, it doesn't use common/ACEX1K.c.

Yes, common/ACEX1K.c was the base for me to make the cyclon2.c.

>>>> CYC2_ps_load in common/cyclon2.c the nCONFIG pin is never de-asserted
>>>> during preparation. This code can't work.
>>> No idea. I have to admit, that I didn't implement the FPGA booting on
>>> this board. But it seems to work fine.
>> yes - because it's a board specific implementation with an "general"
>> interface.
> 
> ???

What do you mean with "board specific implementation". Its for a cyclon2
FPGA. I am not a FPGA specialist, but I think there were some differences
between this FPGAs and so I made a new File ...

>>>> Is there any interest in getting this fixed ?
>>> Sure.
>> But implementing the Altera path in a clean way means discarding the
>> ACEX1K and breaking the alpr borad.
>> I'm quite sure that Wolfgang will reject those changes.
> 
> Yes, I will reject this too. :)

Why you break the alpr board. It uses the common/cyclon2.c?
(OK, we should make a include/cyclon2.h and then we can drop the ACEX1K, right?)

>> How can we solve this ?
> 
> By trying to solve it in a compatible way. I added Heiko Schocher to CC too, 
> since he was responsible for the FPGA booting implementation of the alpr 
> board.

I have to admit that this was my First and only FPGA Implementation.
Stefan, do you know, if we have somewhere an alpr board, so we can do
tests with it, if we change code?

bye
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany