[U-Boot-Users] [PATCH] Add flash programming counter]

[Jerry Van Baren]

Stefan Roese wrote:
> On Friday 07 March 2008, Jerry Van Baren wrote:
>>> would be nice. This way the developer could see, if the interface to the
>>> FLASH chips is optimized. But I think this is overkill too. Let's
>>> concentrate on a clean progress bar with a fixed length.
>>>
>>> Patches welcome. :)
>>>
>>> Best regards,
>>> Stefan
>> All but the timing part ;-)
>> <http://article.gmane.org/gmane.comp.boot-loaders.u-boot/37626>
> 
> Yes, thanks. I did already write a reply to this. Crashes on my system while 
> programming 16Mbytes.
> 
> Best regards,
> Stefan

Odd, I didn't see your reply, saying "cr at sh" must trigger our mail 
filter, it's built on Microsoft technology. ;-)  I can read your reply 
in gmane.org, now that I know to look.  :-/

The crash is undoubtedly due to a buffer overflow on the format string 
(16MB => .  Adopting Clemen's proposal for a fixed length bar (see 
previous email for a 50 dot bar example) is trivial.

The saveenv also looks funky.  I only mucked with the cmd_mem.c command 
to make it display better with the progress dots, obviously the saveenv 
command needs to have the same changes
   s/"Writing to Flash... "/"Writing to Flash\n"/
Apparently saveenv does four very short program operations.

> => saveenv
> 
> [snip]
> 
> Writing to Flash... |
> |
> |
> |
> done
> 
> [snip]

If you want to extend my patch, here's your chance to grab all the 
glory.  ;-)

Best regards,
gvb