[U-Boot-Users] [PATCH 2/9] ppc4xx: miiphy.c reworked
Stefan Roese
sr at denx.de
Tue Mar 11 11:06:05 CET 2008
While adding the 460EX/GT support I reworked the 4xx miiphy code. It
badly neede some cleanup.
Signed-off-by: Stefan Roese <sr at denx.de>
---
cpu/ppc4xx/miiphy.c | 196 +++++++++++++++++++++------------------------------
1 files changed, 80 insertions(+), 116 deletions(-)
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
index 3978773..c882720 100644
--- a/cpu/ppc4xx/miiphy.c
+++ b/cpu/ppc4xx/miiphy.c
@@ -29,6 +29,11 @@
|
+-----------------------------------------------------------------------------*/
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
#include <common.h>
#include <asm/processor.h>
#include <asm/io.h>
@@ -38,7 +43,10 @@
#include <405_mal.h>
#include <miiphy.h>
-#undef ET_DEBUG
+#if !defined(CONFIG_PHY_CLK_FREQ)
+#define CONFIG_PHY_CLK_FREQ 0
+#endif
+
/***********************************************************/
/* Dump out to the screen PHY regs */
/***********************************************************/
@@ -164,9 +172,21 @@ int phy_setup_aneg (char *devname, unsigned char addr)
/***********************************************************/
/* read a phy reg and return the value with a rc */
/***********************************************************/
+/* AMCC_TODO:
+ * Find out of the choice for the emac for MDIO is from the bridges,
+ * i.e. ZMII or RGMII as approporiate. If the bridges are not used
+ * to determine the emac for MDIO, then is the SDR0_ETH_CFG[MDIO_SEL]
+ * used? If so, then this routine below does not apply to the 460EX/GT.
+ *
+ * sr: Currently on 460EX only EMAC0 works with MDIO, so we always
+ * return EMAC0 offset here
+ */
unsigned int miiphy_getemac_offset (void)
{
-#if (defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)) && defined(CONFIG_NET_MULTI)
+#if (defined(CONFIG_440) && \
+ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_460EX) && !defined(CONFIG_460GT)) && \
+ defined(CONFIG_NET_MULTI)
unsigned long zmii;
unsigned long eoffset;
@@ -217,153 +237,97 @@ unsigned int miiphy_getemac_offset (void)
#endif
}
-int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg,
- unsigned short *value)
+static int emac_miiphy_wait(u32 emac_reg)
{
- unsigned long sta_reg; /* STA scratch area */
- unsigned long i;
- unsigned long emac_reg;
+ u32 sta_reg;
+ int i;
- emac_reg = miiphy_getemac_offset ();
- /* see if it is ready for 1000 nsec */
+ /* wait for completion */
i = 0;
-
- /* see if it is ready for sec */
- while ((in_be32((void *)EMAC_STACR + emac_reg) & EMAC_STACR_OC) ==
- EMAC_STACR_OC_MASK) {
- udelay (7);
- if (i > 5) {
-#ifdef ET_DEBUG
- sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
- printf ("read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
- printf ("read err 1\n");
-#endif
+ do {
+ sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
+ if (i++ > 5) {
+ debug("%s [%d]: Timeout! EMAC_STACR=0x%0x\n", __func__,
+ __LINE__, sta_reg);
return -1;
}
- i++;
- }
+ udelay(10);
+ } while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK);
+
+ return 0;
+}
+
+static int emac_miiphy_command(u8 addr, u8 reg, int cmd, u16 value)
+{
+ u32 emac_reg;
+ u32 sta_reg;
+
+ emac_reg = miiphy_getemac_offset();
+
+ /* wait for completion */
+ if (emac_miiphy_wait(emac_reg) != 0)
+ return -1;
+
sta_reg = reg; /* reg address */
+
/* set clock (50Mhz) and read flags */
#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
- sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_READ;
+ sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | cmd;
#else
- sta_reg |= EMAC_STACR_READ;
+ sta_reg |= cmd;
#endif
#else
- sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ;
+ sta_reg = (sta_reg | cmd) & ~EMAC_STACR_CLK_100MHZ;
#endif
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \
- !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
- !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
- !defined(CONFIG_405EX)
+ /* Some boards (mainly 405EP based) define the PHY clock freqency fixed */
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
-#endif
- sta_reg = sta_reg | (addr << 5); /* Phy address */
+ sta_reg = sta_reg | ((u32)addr << 5); /* Phy address */
sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */
+ if (cmd == EMAC_STACR_WRITE)
+ memcpy(&sta_reg, &value, 2); /* put in data */
+
out_be32((void *)EMAC_STACR + emac_reg, sta_reg);
-#ifdef ET_DEBUG
- printf ("a2: write: EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
-#endif
+ debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
- sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
-#ifdef ET_DEBUG
- printf ("a21: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
-#endif
- i = 0;
- while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) {
- udelay (7);
- if (i > 5)
- return -1;
+ /* wait for completion */
+ if (emac_miiphy_wait(emac_reg) != 0)
+ return -1;
- i++;
- sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
-#ifdef ET_DEBUG
- printf ("a22: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
-#endif
- }
+ debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
if ((sta_reg & EMAC_STACR_PHYE) != 0)
return -1;
- *value = *(short *)(&sta_reg);
return 0;
+}
-} /* phy_read */
-
-/***********************************************************/
-/* write a phy reg and return the value with a rc */
-/***********************************************************/
-
-int emac4xx_miiphy_write (char *devname, unsigned char addr, unsigned char reg,
- unsigned short value)
+int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg,
+ unsigned short *value)
{
- unsigned long sta_reg; /* STA scratch area */
- unsigned long i;
+ unsigned long sta_reg;
unsigned long emac_reg;
emac_reg = miiphy_getemac_offset ();
- /* see if it is ready for 1000 nsec */
- i = 0;
-
- while ((in_be32((void *)EMAC_STACR + emac_reg) & EMAC_STACR_OC) ==
- EMAC_STACR_OC_MASK) {
- if (i > 5)
- return -1;
-
- udelay (7);
- i++;
- }
- sta_reg = 0;
- sta_reg = reg; /* reg address */
- /* set clock (50Mhz) and read flags */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_405EX)
-#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
- sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_WRITE;
-#else
- sta_reg |= EMAC_STACR_WRITE;
-#endif
-#else
- sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ;
-#endif
-
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \
- !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
- !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
- !defined(CONFIG_405EX)
- sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; /* Set clock frequency (PLB freq. dependend) */
-#endif
- sta_reg = sta_reg | ((unsigned long)addr << 5); /* Phy address */
- sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */
- memcpy (&sta_reg, &value, 2); /* put in data */
- out_be32((void *)EMAC_STACR + emac_reg, sta_reg);
+ if (emac_miiphy_command(addr, reg, EMAC_STACR_READ, 0) != 0)
+ return -1;
- /* wait for completion */
- i = 0;
sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
-#ifdef ET_DEBUG
- printf ("a31: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
-#endif
- while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) {
- udelay (7);
- if (i > 5)
- return -1;
-
- i++;
- sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
-#ifdef ET_DEBUG
- printf ("a32: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
-#endif
- }
-
- if ((sta_reg & EMAC_STACR_PHYE) != 0)
- return -1;
+ *value = *(u16 *)(&sta_reg);
return 0;
+}
-} /* phy_write */
+/***********************************************************/
+/* write a phy reg and return the value with a rc */
+/***********************************************************/
+
+int emac4xx_miiphy_write (char *devname, unsigned char addr, unsigned char reg,
+ unsigned short value)
+{
+ return emac_miiphy_command(addr, reg, EMAC_STACR_WRITE, value);
+}
--
1.5.4.4
More information about the U-Boot
mailing list