[U-Boot-Users] [MIPS] Add <asm/asm.h>
Shinya Kuribayashi
skuribay at ruby.dti.ne.jp
Mon Mar 17 15:45:37 CET 2008
This file contains some useful macros for MIPS assembler code.
Signed-off-by: Shinya Kuribayashi <skuribay at ruby.dti.ne.jp>
---
include/asm-mips/asm.h | 409 ++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 409 insertions(+), 0 deletions(-)
create mode 100644 include/asm-mips/asm.h
diff --git a/include/asm-mips/asm.h b/include/asm-mips/asm.h
new file mode 100644
index 0000000..608cfcf
--- /dev/null
+++ b/include/asm-mips/asm.h
@@ -0,0 +1,409 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle
+ * Copyright (C) 1999 by Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2002 Maciej W. Rozycki
+ *
+ * Some useful macros for MIPS assembler code
+ *
+ * Some of the routines below contain useless nops that will be optimized
+ * away by gas in -O mode. These nops are however required to fill delay
+ * slots in noreorder mode.
+ */
+#ifndef __ASM_ASM_H
+#define __ASM_ASM_H
+
+#include <asm/sgidefs.h>
+
+#ifndef CAT
+#ifdef __STDC__
+#define __CAT(str1, str2) str1##str2
+#else
+#define __CAT(str1, str2) str1/**/str2
+#endif
+#define CAT(str1, str2) __CAT(str1, str2)
+#endif
+
+/*
+ * PIC specific declarations
+ * Not used for the kernel but here seems to be the right place.
+ */
+#ifdef __PIC__
+#define CPRESTORE(register) \
+ .cprestore register
+#define CPADD(register) \
+ .cpadd register
+#define CPLOAD(register) \
+ .cpload register
+#else
+#define CPRESTORE(register)
+#define CPADD(register)
+#define CPLOAD(register)
+#endif
+
+/*
+ * LEAF - declare leaf routine
+ */
+#define LEAF(symbol) \
+ .globl symbol; \
+ .align 2; \
+ .type symbol, @function; \
+ .ent symbol, 0; \
+symbol: .frame sp, 0, ra
+
+/*
+ * NESTED - declare nested routine entry point
+ */
+#define NESTED(symbol, framesize, rpc) \
+ .globl symbol; \
+ .align 2; \
+ .type symbol, @function; \
+ .ent symbol, 0; \
+symbol: .frame sp, framesize, rpc
+
+/*
+ * END - mark end of function
+ */
+#define END(function) \
+ .end function; \
+ .size function, .-function
+
+/*
+ * EXPORT - export definition of symbol
+ */
+#define EXPORT(symbol) \
+ .globl symbol; \
+symbol:
+
+/*
+ * FEXPORT - export definition of a function symbol
+ */
+#define FEXPORT(symbol) \
+ .globl symbol; \
+ .type symbol, @function; \
+symbol:
+
+/*
+ * ABS - export absolute symbol
+ */
+#define ABS(symbol,value) \
+ .globl symbol; \
+symbol = value
+
+#define PANIC(msg) \
+ .set push; \
+ .set reorder; \
+ PTR_LA a0, 8f; \
+ jal panic; \
+9: b 9b; \
+ .set pop; \
+ TEXT(msg)
+
+/*
+ * Print formatted string
+ */
+#ifdef CONFIG_PRINTK
+#define PRINT(string) \
+ .set push; \
+ .set reorder; \
+ PTR_LA a0, 8f; \
+ jal printk; \
+ .set pop; \
+ TEXT(string)
+#else
+#define PRINT(string)
+#endif
+
+#define TEXT(msg) \
+ .pushsection .data; \
+8: .asciiz msg; \
+ .popsection;
+
+/*
+ * Build text tables
+ */
+#define TTABLE(string) \
+ .pushsection .text; \
+ .word 1f; \
+ .popsection \
+ .pushsection .data; \
+1: .asciiz string; \
+ .popsection
+
+/*
+ * MIPS IV pref instruction.
+ * Use with .set noreorder only!
+ *
+ * MIPS IV implementations are free to treat this as a nop. The R5000
+ * is one of them. So we should have an option not to use this instruction.
+ */
+#ifdef CONFIG_CPU_HAS_PREFETCH
+
+#define PREF(hint,addr) \
+ .set push; \
+ .set mips4; \
+ pref hint, addr; \
+ .set pop
+
+#define PREFX(hint,addr) \
+ .set push; \
+ .set mips4; \
+ prefx hint, addr; \
+ .set pop
+
+#else /* !CONFIG_CPU_HAS_PREFETCH */
+
+#define PREF(hint, addr)
+#define PREFX(hint, addr)
+
+#endif /* !CONFIG_CPU_HAS_PREFETCH */
+
+/*
+ * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs.
+ */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1)
+#define MOVN(rd, rs, rt) \
+ .set push; \
+ .set reorder; \
+ beqz rt, 9f; \
+ move rd, rs; \
+ .set pop; \
+9:
+#define MOVZ(rd, rs, rt) \
+ .set push; \
+ .set reorder; \
+ bnez rt, 9f; \
+ move rd, rs; \
+ .set pop; \
+9:
+#endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3)
+#define MOVN(rd, rs, rt) \
+ .set push; \
+ .set noreorder; \
+ bnezl rt, 9f; \
+ move rd, rs; \
+ .set pop; \
+9:
+#define MOVZ(rd, rs, rt) \
+ .set push; \
+ .set noreorder; \
+ beqzl rt, 9f; \
+ move rd, rs; \
+ .set pop; \
+9:
+#endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \
+ (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64)
+#define MOVN(rd, rs, rt) \
+ movn rd, rs, rt
+#define MOVZ(rd, rs, rt) \
+ movz rd, rs, rt
+#endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */
+
+/*
+ * Stack alignment
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define ALSZ 7
+#define ALMASK ~7
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define ALSZ 15
+#define ALMASK ~15
+#endif
+
+/*
+ * Macros to handle different pointer/register sizes for 32/64-bit code
+ */
+
+/*
+ * Size of a register
+ */
+#ifdef __mips64
+#define SZREG 8
+#else
+#define SZREG 4
+#endif
+
+/*
+ * Use the following macros in assemblercode to load/store registers,
+ * pointers etc.
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define REG_S sw
+#define REG_L lw
+#define REG_SUBU subu
+#define REG_ADDU addu
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define REG_S sd
+#define REG_L ld
+#define REG_SUBU dsubu
+#define REG_ADDU daddu
+#endif
+
+/*
+ * How to add/sub/load/store/shift C int variables.
+ */
+#if (_MIPS_SZINT == 32)
+#define INT_ADD add
+#define INT_ADDU addu
+#define INT_ADDI addi
+#define INT_ADDIU addiu
+#define INT_SUB sub
+#define INT_SUBU subu
+#define INT_L lw
+#define INT_S sw
+#define INT_SLL sll
+#define INT_SLLV sllv
+#define INT_SRL srl
+#define INT_SRLV srlv
+#define INT_SRA sra
+#define INT_SRAV srav
+#endif
+
+#if (_MIPS_SZINT == 64)
+#define INT_ADD dadd
+#define INT_ADDU daddu
+#define INT_ADDI daddi
+#define INT_ADDIU daddiu
+#define INT_SUB dsub
+#define INT_SUBU dsubu
+#define INT_L ld
+#define INT_S sd
+#define INT_SLL dsll
+#define INT_SLLV dsllv
+#define INT_SRL dsrl
+#define INT_SRLV dsrlv
+#define INT_SRA dsra
+#define INT_SRAV dsrav
+#endif
+
+/*
+ * How to add/sub/load/store/shift C long variables.
+ */
+#if (_MIPS_SZLONG == 32)
+#define LONG_ADD add
+#define LONG_ADDU addu
+#define LONG_ADDI addi
+#define LONG_ADDIU addiu
+#define LONG_SUB sub
+#define LONG_SUBU subu
+#define LONG_L lw
+#define LONG_S sw
+#define LONG_SLL sll
+#define LONG_SLLV sllv
+#define LONG_SRL srl
+#define LONG_SRLV srlv
+#define LONG_SRA sra
+#define LONG_SRAV srav
+
+#define LONG .word
+#define LONGSIZE 4
+#define LONGMASK 3
+#define LONGLOG 2
+#endif
+
+#if (_MIPS_SZLONG == 64)
+#define LONG_ADD dadd
+#define LONG_ADDU daddu
+#define LONG_ADDI daddi
+#define LONG_ADDIU daddiu
+#define LONG_SUB dsub
+#define LONG_SUBU dsubu
+#define LONG_L ld
+#define LONG_S sd
+#define LONG_SLL dsll
+#define LONG_SLLV dsllv
+#define LONG_SRL dsrl
+#define LONG_SRLV dsrlv
+#define LONG_SRA dsra
+#define LONG_SRAV dsrav
+
+#define LONG .dword
+#define LONGSIZE 8
+#define LONGMASK 7
+#define LONGLOG 3
+#endif
+
+/*
+ * How to add/sub/load/store/shift pointers.
+ */
+#if (_MIPS_SZPTR == 32)
+#define PTR_ADD add
+#define PTR_ADDU addu
+#define PTR_ADDI addi
+#define PTR_ADDIU addiu
+#define PTR_SUB sub
+#define PTR_SUBU subu
+#define PTR_L lw
+#define PTR_S sw
+#define PTR_LA la
+#define PTR_LI li
+#define PTR_SLL sll
+#define PTR_SLLV sllv
+#define PTR_SRL srl
+#define PTR_SRLV srlv
+#define PTR_SRA sra
+#define PTR_SRAV srav
+
+#define PTR_SCALESHIFT 2
+
+#define PTR .word
+#define PTRSIZE 4
+#define PTRLOG 2
+#endif
+
+#if (_MIPS_SZPTR == 64)
+#define PTR_ADD dadd
+#define PTR_ADDU daddu
+#define PTR_ADDI daddi
+#define PTR_ADDIU daddiu
+#define PTR_SUB dsub
+#define PTR_SUBU dsubu
+#define PTR_L ld
+#define PTR_S sd
+#define PTR_LA dla
+#define PTR_LI dli
+#define PTR_SLL dsll
+#define PTR_SLLV dsllv
+#define PTR_SRL dsrl
+#define PTR_SRLV dsrlv
+#define PTR_SRA dsra
+#define PTR_SRAV dsrav
+
+#define PTR_SCALESHIFT 3
+
+#define PTR .dword
+#define PTRSIZE 8
+#define PTRLOG 3
+#endif
+
+/*
+ * Some cp0 registers were extended to 64bit for MIPS III.
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define MFC0 mfc0
+#define MTC0 mtc0
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define MFC0 dmfc0
+#define MTC0 dmtc0
+#endif
+
+#define SSNOP sll zero, zero, 1
+
+#ifdef CONFIG_SGI_IP28
+/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */
+#include <asm/cacheops.h>
+#define R10KCBARRIER(addr) cache Cache_Barrier, addr;
+#else
+#define R10KCBARRIER(addr)
+#endif
+
+#endif /* __ASM_ASM_H */
More information about the U-Boot
mailing list