[U-Boot-Users] [PATCH 2/2 resend] Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
Jerry Van Baren
gvb.uboot at gmail.com
Wed Mar 19 02:44:41 CET 2008
Signed-off-by: Gerald Van Baren <vanbaren at cideas.com>
---
Hi Kim,
This is useful if/when Stefan Roese applies the previous patch "Flash
programming progress countdown."
Best regards,
gvb
include/configs/MPC8360EMDS.h | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index eff9fba..82860ba 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -194,6 +194,7 @@
#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
#define CFG_FLASH_SIZE 32 /* max FLASH size is 32M */
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash
base */
#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */
--
1.5.4.1
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
More information about the U-Boot
mailing list