[U-Boot-Users] [PATCH v2 9/9] mpc83xx: enable the SATA interface on mpc837xemds board

[Dave Liu]

Enable the first two SATA interfaces on MPC837xEMDS board,
The two SATA ports are on LYNX1. (SATA0/1 on J4/5)

Signed-off-by: Dave Liu <daveliu at freescale.com>
---
 include/configs/MPC837XEMDS.h |   23 +++++++++++++++++++++++
 1 files changed, 23 insertions(+), 0 deletions(-)

diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 2ac3d37..f17a2d8 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -338,6 +338,29 @@
 #define CONFIG_FSL_SERDES1_VDD_1V	1
 
 /*
+ * SATA
+ */
+#define CONFIG_LIBATA
+#define CONFIG_FSL_SATA
+
+#define CFG_SATA_MAX_DEVICE	2
+#define CONFIG_SATA1
+#define CFG_SATA1_OFFSET	0x18000
+#define CFG_SATA1		(CFG_IMMR + CFG_SATA1_OFFSET)
+#define CFG_SATA1_FLAGS		FLAGS_DMA
+#define CONFIG_SATA2
+#define CFG_SATA2_OFFSET	0x19000
+#define CFG_SATA2		(CFG_IMMR + CFG_SATA2_OFFSET)
+#define CFG_SATA2_FLAGS		FLAGS_DMA
+
+#ifdef CONFIG_FSL_SATA
+#define CONFIG_LBA48
+#define CONFIG_CMD_SATA
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#endif
+
+/*
  * General PCI
  * Addresses are mapped 1-1.
  */
-- 
1.5.4.rc4